CE Smith 26244GA Pontoon Wing Bracket, 7 Inch Adjustment Slot, Hot Dip Galvanized Steel

The CE Smith 26244GA Pontoon Wing Bracket is a bolster-style bracket built to support bunk boards in the shallow V cradle configuration that best suits pontoon hulls. Instead of the flat bunk arrangement used on standard V-hull trailers, pontoon trailers need bunk boards angled to cradle the boat's twin or triple tubes, and this wing bracket provides that angled support point. A 7 inch lateral adjustment slot lets the bracket slide to the exact position needed for precise pontoon-to-trailer alignment, so the bunk boards can be set to match the specific spacing of the pontoon hull being carried.

The bracket is stamped from 1/8 inch thick steel and hot dip galvanized for corrosion resistance in wet, trailered marine use. It is designed to be used with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat, and CE Smith recommends installing one bracket at each frame cross member of the trailer for maximum support and load capacity. Because pontoon hulls concentrate weight differently than a single-hull boat, using enough brackets across the frame is what keeps the load stable and properly cradled during transport.

Overall bracket size is 15 3/4 inches by 2 inches by 6 inches, with a slot measuring 1/2 inch wide by 7 inches long. Each bracket weighs 2.6 pounds.

Specifications

• Brand: CE Smith
• Manufacturer Part Number: 26244GA
• Product Type: Pontoon Wing Bracket
• Overall Size: 15 3/4 inches x 2 inches x 6 inches
• Slot Width: 1/2 inch
• Slot Length: 7 inches
• Material: Hot dip galvanized steel
• Thickness: 1/8 inch
• Weight: 2.6 pounds
• Recommended Bunk Board Sizes: 2x6, 2x8, or 2x10 (laid flat)
• Installation: One bracket per frame cross member
• UPC: 768296007331

Frequently Asked Questions

What is the CE Smith 26244GA Pontoon Wing Bracket used for? The 26244GA is a bolster bracket that supports bunk boards in a shallow V cradle configuration, which is the shape that best suits pontoon hulls rather than a single-hull boat.

Will this bracket fit my pontoon trailer? The 26244GA bracket includes a 7 inch lateral adjustment slot so it can be positioned to match the specific spacing needed for a pontoon hull, and it mounts at the trailer's frame cross members.

What size bunk boards work with the 26244GA bracket? This bracket is designed for use with 2x6, 2x8, or 2x10 carpeted bunk boards installed laid flat.

What is the CE Smith pontoon wing bracket made of? It is made from 1/8 inch thick steel that is hot dip galvanized for corrosion resistance in marine trailering conditions.

How many 26244GA brackets does a trailer need? CE Smith recommends installing one 26244GA bracket at each frame cross member of the trailer for maximum support and load capacity, so the total needed depends on how many cross members the trailer has.

What are the dimensions of the 26244GA bracket? The bracket measures 15 3/4 inches by 2 inches by 6 inches overall, with an adjustment slot that is 1/2 inch wide and 7 inches long.

How does the adjustment slot on this bracket work? The 7 inch lateral adjustment slot lets the 26244GA bracket slide along its length so it can be set to the exact position needed for proper pontoon-to-trailer alignment before tightening.

Is the 26244GA bracket rust resistant? Yes, it is constructed from hot dip galvanized steel, which resists rust and corrosion in wet trailering environments.

How much does the 26244GA bracket weigh? Each CE Smith 26244GA Pontoon Wing Bracket weighs 2.6 pounds.

Can the 26244GA bracket be used on a standard single-hull boat trailer? The 26244GA is designed specifically to create the shallow V cradle configuration that suits pontoon hulls, rather than the flat bunk setup typical of single-hull trailers.

Does the 26244GA come as a single bracket or a set? The 26244GA is sold as an individual bracket; CE Smith recommends using one at each frame cross member, so multiple units are typically needed per trailer.