Garelick 19536 Outboard Transom Swim Platform with Telescoping Ladder

The Garelick 19536 Outboard Transom Swim Platform mounts directly to an outboard motor's transom and pairs a durable HDPE platform with a two-step telescoping stainless steel ladder for easy water access. The platform mounts at a 10 degree angle on the transom and measures 18 inches wide by 15 inches deep by 0.75 inches tall on its own, with an overall footprint of 18 inches wide by 19 inches deep once the wraparound rail is installed. Rail height runs 11.5 inches above and below the platform surface. One stainless steel wraparound rail (1 inch / 3 cm diameter) and one underside support rail are included, and both are reversible so the handrail can be positioned on whichever side of the transom suits the installation. The telescoping ladder extends to 23.5 inches deployed and collapses to 13.5 inches stowed, sliding up and under the platform when not in use to keep the swim step clear. Ladder width is 11.25 inches, and its flat poly treads add comfort and grip for bare feet. The HDPE platform is pre-drilled for straightforward assembly, and all hardware is stainless steel for corrosion resistance in a marine environment. Mounting fasteners are not included; a marine grade adhesive/caulking compound is recommended at the mounting points, and a backing plate is recommended on transoms less than 2 inches thick. Periodic fresh water rinsing and mild abrasive cleaning are recommended to maintain the finish and help prevent corrosion.

Specifications

• Brand: Garelick
• Manufacturer Part Number: 19536
• Mounting Location: Outboard Transom
• Mounting Angle: 10 degrees
• Ladder Type: 2-Step Telescoping
• Platform Dimensions: 18 inches Wide x 15 inches Deep x 0.75 inches Tall
• Overall Dimensions (with rail): 18 inches Wide x 19 inches Deep
• Rail Height Above and Below Platform: 11.5 inches
• Ladder Length Deployed: 23.5 inches
• Ladder Length Stowed: 13.5 inches
• Ladder Width: 11.25 inches
• Rail Diameter: 1 inch (3 cm), stainless steel
• Material: White Polyethylene, Stainless Steel
• Hardware: Stainless Steel
• Weight: 20 pounds
• UPC: 038203195360

Frequently Asked Questions

What is the Garelick 19536 designed to fit? The Garelick 19536 is designed for use on outboard transoms, mounting at a 10 degree angle to the transom surface.

How big is the platform itself? The platform portion of the Garelick 19536 measures 18 inches wide by 15 inches deep by 0.75 inches tall, with an overall footprint of 18 inches wide by 19 inches deep once the wraparound rail is attached.

How far does the ladder extend when deployed? The telescoping ladder on the 19536 extends to 23.5 inches when deployed and collapses to 13.5 inches for stowage, with a ladder width of 11.25 inches.

Can the handrail be mounted on either side of the transom? Yes, the stainless wraparound rail and underside support rail on the Garelick 19536 are reversible, so the handrail can be positioned on whichever side of the transom is most suitable for the installation.

What material is the platform made from? The Garelick 19536 platform is made from durable, high density white polyethylene, combined with 1 inch diameter stainless steel wraparound and support rails.

Does the 19536 include mounting hardware? Stainless steel hardware is included for assembling the rails and struts to the platform, but the fasteners used to secure the unit to the boat transom are not provided.

How much does the Garelick 19536 weigh? The Garelick 19536 Outboard Transom Swim Platform weighs 20 pounds.

Where does the ladder store when not in use? On the 19536, the ladder steps telescope down easily for use and slide up and under the platform for compact stowage when not needed.

Is a backing plate needed for installation? If the transom is less than 2 inches thick, Garelick recommends mounting a backing plate made of aluminum, marine plywood, or another non-compressive material on the inside of the transom for the 19536 installation.

What angle does the platform mount at? The Garelick 19536 mounts at a 10 degree angle on the transom, positioned parallel to the water line.

What kind of treads does the ladder have? The 19536 ladder uses flat poly treads on each of its two steps for added comfort when climbing in and out of the water.

How should the 19536 be maintained after installation? Garelick recommends periodically checking and re-tightening the mounting hardware on the 19536, along with regular fresh water rinsing and occasional cleaning with a mild abrasive cleaner to retain luster and help prevent corrosion.