Gen3 Marine Stainless Steel Anchor Swivel Connector, 5/16 Inch - 3/8 Inch (8-10mm), 360 Degree Rotation

The Gen3 Marine Stainless Steel Anchor Swivel Connector (5-7084) attaches between your anchor and chain, or between the chain and line, to keep rope from twisting and to prevent snagging while anchoring. Built from corrosion resistant stainless steel, it rotates a full 360 degrees so the anchor can turn freely with current and wind without transferring that twist up through the rode. This lets the anchor set and reset naturally on the seabed while keeping your line and chain tangle-free above it.

Sized for 5/16 inch to 3/8 inch (8-10mm) chain and rope, it works as a straightforward connection point in a typical anchor rode setup: anchor to swivel, swivel to chain, and chain to line. The stainless steel construction is intended to stand up to saltwater exposure without the rust and pitting that plain steel hardware develops over time.

Specifications

• Brand: Gen3 Marine
• Manufacturer Part Number: 5-7084
• Type: Anchor Swivel Connector
• Rope/Chain Size Compatibility: 5/16 inch - 3/8 inch (8-10mm)
• Rotation: 360 degrees
• Material: Stainless Steel
• Finish: Stainless Steel
• Dimensions (L x W x H): 4.5 x 3.5 x 1 inches
• Weight: 1.3 pounds

Frequently Asked Questions

What size chain and rope does this anchor swivel fit? The Gen3 Marine anchor swivel connector (5-7084) is sized for 5/16 inch to 3/8 inch (8-10mm) chain and rope.

What is the anchor swivel made of? It is made from stainless steel, chosen for corrosion resistance in saltwater and freshwater use.

Does the swivel actually rotate? Yes, the 5-7084 swivel connector rotates a full 360 degrees, allowing the anchor to turn independently of the rope and chain above it.

Where does this connector go in the anchor rode? It is designed to attach between the anchor and chain, or between the chain and line, acting as the swivel point in the anchor rode.

Will this stop my anchor line from twisting? Twisting is the main problem this Gen3 Marine swivel addresses: by letting the anchor rotate freely, it keeps the rope and chain from becoming twisted or snagged during deployment and retrieval.

What are the dimensions of the 5-7084 anchor swivel? The Gen3 Marine anchor swivel measures 4.5 x 3.5 x 1 inches.

How much does the anchor swivel weigh? It weighs 1.3 pounds.

Is this swivel rated for saltwater use? The stainless steel construction of the 5-7084 is corrosion resistant, making it suitable for saltwater anchoring conditions.

Can I use this between the chain and the anchor line instead of the anchor itself? Yes, the Gen3 Marine swivel connector can be secured between the chain and line, not just between the anchor and chain.

What brand is this anchor connector? This is a Gen3 Marine product, part number 5-7084.

Does this include the anchor or chain? No, the 5-7084 is the swivel connector only; it is designed to connect your existing anchor, chain, and rope, which are sold separately.