Interlux Interstain Red Mahogany Penetrating Wood Stain, Pint (MPN 5608420) for Interior and Exterior Marine Brightwork

Interstain Red Mahogany is a penetrating marine wood stain formulated to enrich brightwork and restore warm color to faded timber. Its deep-soaking formula draws rich mahogany tone into the grain of interior and exterior wood, delivering a fade-resistant finish that holds its color through sun and spray. Interstain can be applied on its own or mixed into a one-pack varnish to build a darker, richer topcoat.

Specifications

• Brand: Interlux
• Manufacturer Part Number: 5608420
• Color: Red Mahogany
• Size: 1 Pint (16 fl oz)
• Finish: Matte
• Base: Solvent-based penetrating formula
• Surface: Interior and exterior wood
• Weight: 1.7 lb

Preparation and Use

• Clean and prepare bare or previously finished wood by washing with Special Thinner 216 to remove contamination.
• On sound varnish in good condition, sand with 220-320 grit wet-or-dry sandpaper, then wipe clean before coating.
• Areas of damage or peeling should be scraped, sanded or stripped back before staining, and spot-primed as needed.
• May be mixed with a one-pack varnish, following thinning recommendations, to achieve a darker finish.

Frequently Asked Questions

What color is Interlux Interstain 5608420? This Interstain is Red Mahogany, a warm reddish-brown tone that enriches brightwork and restores color to faded wood.

What size is this container? It is a 1 pint container holding 16 fluid ounces of stain.

Can Interstain be used on both interior and exterior wood? Yes. Interstain is suitable for all types of interior and exterior wood surfaces.

Is Interstain fade resistant? Yes. The penetrating formula is fade resistant, helping the color hold up over time on exposed brightwork.

Can I mix Interstain with varnish? Yes. It may be mixed with one-pack varnishes, following the thinning recommendation, to achieve a darker finish.

How do I prepare wood before applying Interstain? Clean and prepare the surface by washing with Special Thinner 216 to remove contamination, then inspect for any damage before coating.

How should I prep existing varnish that is in good condition? Sand it with 220-320 grit wet-or-dry sandpaper and, once dry, wipe it down with a cloth before continuing.

What should I do about damaged or peeling finish? Areas of damage, separation or peeling should be removed by scraping, sanding or with a chemical paint stripper, then spot-primed and varnished before the full job.

What is the base of this stain? Interstain is a solvent-based penetrating stain that soaks into the grain rather than sitting on the surface.

What is the manufacturer part number? The manufacturer part number for this Red Mahogany pint is 5608420.

How much does the pint weigh? The pint weighs approximately 1.7 pounds.

Is Interstain a penetrating stain? Yes. It uses a penetrating formula designed to draw color deep into the wood for a lasting, even tone.