Interlux Primocon Underwater Primer, Grey, 1 Gallon (5509867) - Oil-Based Primer for Underwater Metals Below the Waterline
Interlux Primocon Underwater Primer, Grey, 1 Gallon (5509867) - Oil-Based Primer for Underwater Metals Below the Waterline
Interlux Primocon is a grey, oil-based underwater primer formulated for use below the waterline. It provides a sound, water-resistant base coat on underwater metals, preparing struts, shafts, trim tabs, thru-hull fittings and similar surfaces before the application of antifouling paint. Its matte finish and metal-friendly chemistry make it a dependable foundation in a below-the-waterline coating system.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5509867
- Color: Grey (#808080)
- Finish: Matte
- Size: 1 Gallon (128 fl oz)
- Paint Type: Oil-based
- Item Form: Liquid
- Surface Recommendation: Metal
- Usage: Outdoor, below the waterline
- Dry Time: 8 hours
- Full Cure Time: 24 hours
- Waterproof: Yes
- Container: Can
- UPC: 081948103602
How to Use
As an alternate underwater metals system, apply one thin coat of Viny-Lux Primewash thinned 25 percent, allow it to dry a minimum of one hour but no more than 24 hours, then apply four coats of Primocon (a minimum of five coats on rivets and weld seams). Finish with at least three coats of Interlux antifouling paint. Bring bare metal to a uniform bright finish and remove all sanding or blast residue before priming.
Frequently Asked Questions
What is Interlux Primocon used for? Primocon is an underwater primer used below the waterline to prepare underwater metals such as struts, shafts, trim tabs and thru-hull fittings before the application of antifouling paint.
What color is Primocon? Primocon is grey with a matte finish.
How large is this can? This is a 1 gallon can, equal to 128 fluid ounces.
Is Primocon oil-based or water-based? Primocon is an oil-based primer in liquid form.
How long does Primocon take to dry? Primocon has a dry time of about 8 hours and reaches full cure in approximately 24 hours. Always follow the dry times listed on the product label.
How many coats of Primocon should be applied to underwater metals? As an alternate underwater metals system, apply four coats of Primocon over Viny-Lux Primewash, and a minimum of five coats on rivets and weld seams, then finish with at least three coats of antifouling paint.
Do I need a primewash before applying Primocon? For the alternate underwater metals system, apply one thin coat of Viny-Lux Primewash thinned 25 percent first, let it dry at least one hour but no more than 24 hours, then apply Primocon.
How should the metal be prepared before priming? Bring the metal to a uniform bright finish by sandblasting with non-ferrous media such as clean silica sand, or by grinding with coarse to medium emery cloth. Remove all blast or sanding residue and degrease the surface before priming.
Is Primocon waterproof? Yes. Primocon is waterproof and rated for use below the waterline.
Can Primocon be used outdoors? Yes. Primocon is intended for outdoor, below-the-waterline marine use.
What antifouling paint goes over Primocon on aluminum? When painting aluminum, use Trilux 33 or Tri-Lux II antifouling paint over the primed surface.
What is the manufacturer part number for this primer? The manufacturer part number is 5509867.