Sierra 18-99195 Stator for Johnson Evinrude 4-Cylinder Cross Flow Outboards, 85-140 HP, 1978-1987, 9 Amp

The Sierra 18-99195 is a replacement stator built for Johnson and Evinrude 4-cylinder Cross Flow outboard engines covering the 85, 90, 100, 110, 115, and 140 HP models from 1978 through 1987. The stator is a core charging-system component mounted under the flywheel that generates the AC current used by the ignition system; a failed or weakening stator commonly shows up as hard starting, engine misfires, intermittent power loss at higher RPM, or a dead battery from insufficient charging output. This unit is rated at 9 Amp output, matching the original charging capacity of these Cross Flow powerheads, so no rewiring or ignition component substitutions are needed for a proper fit.

Construction uses a metal core with wound copper coils, encapsulated to resist the heat, vibration, and moisture exposure typical of an outboard's flywheel area. It is designed as a direct, bolt-in replacement for the factory Johnson/Evinrude stator on the applicable 4-cylinder Cross Flow engines, restoring reliable charging and ignition timing signal output without modification to the powerhead.

Specifications

• Brand: Sierra
• Manufacturer Part Number: 18-99195
• Fits: Johnson/Evinrude 4-Cylinder Cross Flow Outboards
• Horsepower Range: 85, 90, 100, 110, 115, and 140 HP
• Model Years: 1978-1987
• Output: 9 Amp
• Material: Metal
• Weight: 2.4 pounds
• UPC: 808282393779
• OEM Cross Reference Numbers: 583104, 583023, 582867, 582497, 582404, 581830, 581865, 582016, 582023, 581987, 583671, 583672, 763781

Fitment

• Johnson/Evinrude 4-Cylinder Cross Flow Outboards, 85, 90, 100, 110, 115, and 140 HP, 1978-1987

Replaces (OEM)

• 583104
• 583023
• 582867
• 582497
• 582404
• 581830
• 581865
• 582016
• 582023
• 581987
• 583671
• 583672
• 763781

Frequently Asked Questions

What engines does the Sierra 18-99195 stator fit? The Sierra 18-99195 fits Johnson and Evinrude 4-cylinder Cross Flow outboards in the 85, 90, 100, 110, 115, and 140 HP range built from 1978 through 1987.

What is the amp output of this stator? This stator, Sierra part number 18-99195, is rated at 9 Amp output, matching the original charging capacity of the factory unit on applicable 4-cylinder Cross Flow engines.

Will this stator work as a direct replacement for my original Johnson/Evinrude stator? Yes, the Sierra 18-99195 is a direct bolt-in replacement, and it crosses over to original Johnson/Evinrude part numbers including 583104, 583023, 582867, 582497, 582404, 581830, 581865, 582016, 582023, 581987, 583671, 583672, and 763781.

How much does the stator weigh? The Sierra 18-99195 stator weighs 2.4 pounds.

What material is the stator made from? It uses a metal core construction with encapsulated windings designed to hold up to the heat and vibration under the flywheel of an outboard engine.

What symptoms indicate a failing stator on these Cross Flow outboards? Hard starting, intermittent misfires, power loss at higher RPM, and a battery that will not stay charged are common signs of a weak or failed stator on 4-cylinder Cross Flow Johnson/Evinrude engines that the 18-99195 is built to replace.

Does the 18-99195 fit 6-cylinder Johnson/Evinrude Cross Flow engines? No, the Sierra 18-99195 is built for the 4-cylinder Cross Flow engine range (85 to 140 HP, 1978-1987); 6-cylinder models use a different stator part.

Is any rewiring needed to install this stator? No, the Sierra 18-99195 is a direct replacement for the factory 4-cylinder Cross Flow stator, so it installs using the existing wiring and connectors without modification.

What years of engines does this part cover? The Sierra 18-99195 covers 1978 through 1987 model year Johnson/Evinrude 4-cylinder Cross Flow outboards.

What comes in the box with this part? The Sierra 18-99195 ships as a single stator unit, ready to install in place of the original Johnson/Evinrude 4-cylinder Cross Flow stator.

Is this a genuine Sierra part or an aftermarket equivalent? The 18-99195 is sold under the Sierra part number and is manufactured to replace the original equipment stator on the listed Johnson/Evinrude 4-cylinder Cross Flow engines.