Lenco 15041-101 Heavy Duty Performance 12 x 12 Inch Electric Trim Tab Kit

The Lenco 15041-101 Heavy Duty Performance Electric Trim Tab Kit is built for boats that need extra strength to hold trim in adverse conditions at higher speeds. Each kit supplies two 12 inch deep by 12 inch wide trim tab blades machined from 12-gauge 304 stainless steel and electro-polished for extreme corrosion resistance in marine environments. Power comes from a pair of XD Extreme Duty actuators, chosen for the added durability this heavy-duty kit is designed around, each fitted with a 6 foot lead and Deutsch connector for a secure, weatherproof electrical connection. A 20 foot actuator extension wiring harness is included with each actuator to reach from the transom to the helm area. Trim tabs remain one of the most effective ways to control a boat's running attitude, correcting bow rise, listing from uneven loads, and cavitation at speed, and this heavy duty configuration is intended for boats that put additional load on the tabs and actuators. The kit ships without a control switch, which is sold separately, and without boat mounting hardware, so installers should plan for both before starting the install. This is the actuator and blade assembly only; confirm your helm switch and mounting hardware needs ahead of installation.

Specifications

• Brand: Lenco
• Manufacturer Part Number: 15041-101
• Product Type: Trim Tab Kit
• Style: Electric Trim Tabs
• Trim Tab Blade Dimensions: 12 inches deep x 12 inches wide
• Blade Material: 12-gauge 304 stainless steel, electro-polished finish
• Actuator Type: XD Extreme Duty Actuators
• Actuator Lead Length: 6 feet, with Deutsch connectors
• Actuator Extension Wiring Harness Length: 20 feet
• Switch: Sold separately, not included
• Boat Mounting Hardware: Not included
• Weight: 33.9 pounds
• UPC: 874847004633

Frequently Asked Questions

What size are the trim tab blades in the Lenco 15041-101 kit? The blades in the Lenco 15041-101 Heavy Duty Performance Trim Tab Kit are 12 inches deep by 12 inches wide.

Does this kit include a control switch? No, the Lenco 15041-101 kit is sold without a switch; the trim tab switch must be purchased separately.

What are the trim tab blades made from? 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance in marine environments.

Is boat mounting hardware included with the 15041-101 kit? No, boat mounting hardware is not included with this trim tab kit and must be sourced separately for installation.

What type of actuators come with the Heavy Duty Performance kit? Two XD Extreme Duty Actuators are included, each with a 6 foot lead and Deutsch connector.

How long are the actuator extension wiring harnesses? Each of the two included actuator extension wiring harnesses is 20 feet long, allowing the run from the transom to the helm.

What is included in the Lenco 15041-101 Trim Tab Kit? The kit includes two 12 inch x 12 inch trim tab blades, two XD Extreme Duty actuators with 6 foot leads and Deutsch connectors, and two 20 foot actuator extension wiring harnesses.

Why choose the Heavy Duty Performance kit over a standard trim tab kit? The 15041-101 kit is designed for boats that need extra strength, using XD Extreme Duty actuators to support the boat in adverse conditions at higher speeds.

How much does the Lenco 15041-101 trim tab kit weigh? The complete kit weighs 33.9 pounds.

Will these trim tabs corrode in saltwater use? The 12-gauge 304 stainless steel blades are electro-polished specifically for extreme corrosion resistance, making the 15041-101 kit suited to marine environments.

Can I use my existing trim tab switch with this kit? Since the 15041-101 kit ships without a switch, an existing compatible trim tab switch can be wired in, or a switch can be purchased separately.