Lenco Marine Trim Tab Actuator Extension Harness, 20 Foot 14 Gauge Cable, Part 30133-103D

The Lenco Marine Actuator Extension Harness (part number 30133-103D) is a 20 foot, 14 gauge extension cable built to run power from a Lenco trim tab helm or control unit out to the actuator when the factory-length wiring will not reach. The harness uses a copper core conductor with PVC insulation for reliable current flow and protection against moisture and abrasion in the bilge or transom area, and it terminates in a DT connector for a secure, weatherproof plug-in connection to compatible Lenco actuator wiring. At 0.06 inches in wire diameter, the cable is sized to handle actuator current draw over the full 20 foot run without a bulky gauge upgrade.

This harness is intended as a straightforward extension for boats where the trim tab actuators sit farther from the helm or control box than the stock cable allows, letting installers avoid splicing and add-on connectors. It ships as a single 20 foot cable, ready to connect between the existing Lenco wiring and the actuator.

Specifications

• Brand: Lenco Marine
• Manufacturer Part Number: 30133-103D
• Product Type: Actuator Extension Cable
• Length: 20 feet
• Wire Gauge: 14 GA
• Wire Diameter: 0.06 inches
• Connector Type: DT Connector
• Material: Copper (core), PVC (insulation)
• Packaged Dimensions: 9 x 12 x 1 inches
• Weight: 0.78 pounds
• UPC: 874847003995
• Unit Count: 1

Fitment

Designed for use with compatible Lenco Marine trim tab actuator wiring systems using a DT connector.

Frequently Asked Questions

How long is the Lenco 30133-103D actuator extension harness? The 30133-103D harness measures 20 feet in length, giving enough extra cable to route power from the helm or control unit to a trim tab actuator that sits beyond the reach of the factory wiring.

What gauge wire does this Lenco extension cable use? It is built with 14 gauge (14 GA) wire, measuring 0.06 inches in wire diameter, sized to carry actuator current over the full 20 foot length.

What type of connector is on the Lenco 30133-103D harness? This harness terminates in a DT connector, which plugs into compatible Lenco Marine trim tab actuator wiring for a secure connection.

What material is the actuator extension cable made from? The cable uses a copper core conductor with PVC insulation, a combination chosen for good conductivity along with resistance to moisture and abrasion in a boat's bilge or transom area.

Will part number 30133-103D work with any trim tab system? The 30133-103D extension harness is built for Lenco Marine trim tab actuator wiring that uses a matching DT connector; it is not a universal cable for other brands' systems.

How much does the Lenco 30133-103D cable weigh? The Lenco 30133-103D actuator extension harness weighs 0.78 pounds.

What are the packaged dimensions of this harness? As packaged, the 30133-103D cable measures 9 x 12 x 1 inches.

How many cables come in one package? Each package of the Lenco 30133-103D harness contains one 20 foot extension cable (unit count of 1).

Why would I need an actuator extension harness instead of the stock wiring? An extension harness like the Lenco 30133-103D is used when the factory-length actuator wiring cannot reach from the helm or control box to the actuator location, avoiding the need to splice or add extra connectors.

Is the Lenco 30133-103D harness genuine Lenco Marine product? Yes, part number 30133-103D is manufactured by Lenco Marine as an actuator extension cable for its trim tab systems.