Lewmar DTX Stainless Steel Plow Anchor, 22 lb, Part 0057210, for Boats 25-41 Feet

The Lewmar DTX anchor is a one-piece stainless steel plow anchor built to set immediately at any drop angle, giving consistent holding power without the need to reposition or re-set. This 22 lb model is sized for boats 25 feet to 41 feet in length and uses a narrow shank that penetrates the seabed quickly for deep, secure engagement.

Construction is 316 stainless steel throughout for corrosion resistance and long-term durability in saltwater and freshwater environments alike. The anchor is self-launching, meaning it deploys cleanly from a bow roller without hanging up or requiring manual adjustment. A lead ballast built into the tip of the anchor helps it find the optimal center of gravity as it drops, so it digs into the seabed in the correct orientation rather than landing flat or on its side. This design gives the DTX anchor a high holding-power-to-weight ratio, independently certified by Lloyd's Test Certification.

The recommended chain size for this anchor is 5/16 inch or 8 mm. As a one-piece design with no moving pivot parts, the DTX anchor avoids the wear points and rattle common to hinged plow anchors, making it a durable primary or secondary ground tackle choice for cruising and coastal boats in the 25 to 41 foot range.

Specifications

• Brand: Lewmar
• Manufacturer Part Number: 0057210
• Type: DTX Plow Anchor, one-piece design
• Material: 316 stainless steel
• Finish/Color: Stainless steel
• Weight: 22.5 pounds
• Width: 12 7/32 inches
• Height: 11-1/2 inches
• Length: 27 3/8 inches
• Recommended Chain Size: 5/16 inch or 8 mm
• Recommended Boat Length: 25 feet to 41 feet
• Deployment: Self-launching from bow roller

Frequently Asked Questions

What size boats is the Lewmar 0057210 anchor recommended for? The Lewmar DTX anchor, part number 0057210, is recommended for boats 25 feet to 41 feet in length at this 22 lb weight.

What material is this anchor made from? It is made from 316 stainless steel, chosen for corrosion resistance in saltwater and freshwater use.

How much does the Lewmar 0057210 anchor weigh? This anchor weighs 22.5 pounds.

What are the dimensions of the DTX anchor? The Lewmar DTX anchor measures 12 7/32 inches wide, 11-1/2 inches tall, and 27 3/8 inches long.

What chain size should be used with this anchor? A chain size of 5/16 inch or 8 mm is recommended for the Lewmar 0057210 DTX anchor.

Is the DTX anchor self-launching? Yes, the DTX anchor is self-launching and designed to deploy cleanly from a bow roller.

Does this anchor have a one-piece or hinged design? The Lewmar DTX anchor uses a one-piece design rather than a hinged plow, which avoids the pivot wear points found on hinged anchors.

How does the anchor achieve good holding power for its weight? A lead ballast built into the tip of the DTX anchor helps it find the optimal center of gravity as it drops, so it digs into the seabed properly rather than landing flat; its holding power per pound is certified by Lloyd's Test Certification.

Will the anchor set correctly no matter how it lands? The narrow shank and weighted tip of the Lewmar DTX anchor, part 0057210, allow it to set immediately when dropped at any angle.

What is included when ordering part number 0057210? The listing for Lewmar part 0057210 includes one 22 lb DTX stainless steel anchor.