Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)

Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)

13-1/8" x 21" (3-Blade B-Series)
$400.32
Skip to product information
Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)
  • Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)
  • Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)
  • Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)
  • Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)
Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)

Michigan Wheel Ballistic Series Stainless Steel Propellers - Available in 13-1/8" x 21" (3-Blade) to 14-1/8" x 25" (4-Blade)

$400.32
Size

The Michigan Wheel Ballistic Series brings performance-boat propeller technology to sterndrive and outboard applications that demand serious bite, hole shot, and top-end speed. Precision-cast from stainless steel and finished with thin, high-rake blade sections, Ballistic propellers are engineered to hold their shape under the loads generated by high-horsepower engines, delivering consistent thrust and reduced slip compared to aluminum or lower-grade stainless props. Each propeller in this line is right-hand rotation and built on Michigan Wheel's XHS/XHS II interchangeable hub system, so a single hub kit (sold separately) lets you service or swap propellers without pulling the prop shaft hardware apart.

This line spans two distinct Ballistic configurations to match different boat and power combinations: the Ballistic B-Series 3-Blade for balanced acceleration and efficient cruising, and the Ballistic XL A-Series 4-Blade for maximum grip, lift, and stability at higher loads. Both are precision CNC-finished for tight tolerances and long-term durability in fresh or salt water.

Specifications

  • Brand: Michigan Wheel
  • Material: Stainless steel with brushed finish
  • Rotation: Right hand
  • Hub System: XHS/XHS II (hub kit sold separately)
  • Diameter range: 13-1/8 inches to 14-1/8 inches
  • Pitch range: 21 inches to 25 inches
  • Blade count: 3-Blade and 4-Blade options

Sizes & Options

Choose the Ballistic 933419 (13-1/8 x 21, 3-Blade B-Series) for standard-duty sterndrive or outboard setups where balanced acceleration and top speed are the priority. Choose the Ballistic 963525 (14-1/8 x 25, 4-Blade XL A-Series) when you need extra blade area for heavier boats, higher horsepower engines, or applications where hole shot and mid-range grip matter most. Match diameter and pitch to your engine's rated RPM range and your boat's weight and hull type; consult your engine manufacturer's prop selection guide or a Michigan Wheel dealer if you are unsure which configuration fits your setup.

You may also like