Moeller 3/8 Inch Brass Hose Mender with Stainless Steel Clamps, Part 033213-10-1

The Moeller 3/8 inch brass hose mender, part 033213-10-1, is a fuel-system repair fitting used to splice and reconnect a length of 3/8 inch marine fuel hose that has been cut, cracked, or otherwise compromised. Rather than replacing an entire fuel line run, the hose mender lets you rejoin the hose at the damaged section, restoring a secure, leak-resistant connection. The fitting is built from brass for corrosion resistance and long service life in a marine fuel environment, and each unit ships complete with two stainless steel hose clamps so the repair is ready to install without sourcing separate hardware.

To use it, the two cut ends of the 3/8 inch hose are slid over the brass barb on each side of the mender, and the included stainless steel clamps are tightened down over the hose to seat it against the barb and seal the joint. This is a straightforward repair suited to DIY fuel line maintenance on boats, and it is sized specifically for 3/8 inch inside-diameter hose. Moeller also offers this same style of mender in 1/4 inch and 5/16 inch sizes, so it is worth confirming your hose diameter before ordering to make sure part 033213-10-1 is the correct 3/8 inch size for your repair.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 033213-10-1
• Hose Size: 3/8 in.
• Material: Brass
• Included Components: Two stainless steel hose clamps
• Quantity: 1 hose mender
• Weight: 0.1 pounds

Frequently Asked Questions

What size hose does the Moeller 033213-10-1 hose mender fit? The Moeller 033213-10-1 hose mender is sized for 3/8 inch inside-diameter hose. Moeller also makes this same mender style in 1/4 inch and 5/16 inch sizes, so confirm your hose diameter before ordering.

What is a hose mender used for? A hose mender splices a cut or damaged section of fuel hose back together, letting you repair a fuel line in place instead of replacing the whole run. The Moeller 033213-10-1 is designed for this kind of 3/8 inch fuel hose repair.

Does the 033213-10-1 come with clamps? Yes, each Moeller 033213-10-1 hose mender includes two stainless steel hose clamps, so you have everything needed to complete the splice without buying separate clamps.

What material is the Moeller 033213-10-1 hose mender made from? It is a brass hose mender, chosen for its corrosion resistance in a marine fuel environment. The stainless steel clamps included with part 033213-10-1 add further corrosion resistance at the clamp points.

How much does the 033213-10-1 hose mender weigh? The Moeller 033213-10-1 hose mender weighs 0.1 pounds.

How do I install the Moeller 033213-10-1 hose mender? Slide the cut ends of the 3/8 inch fuel hose over each end of the brass barb, then position and tighten the two included stainless steel clamps over the hose to seat it against the barb and seal the joint.

Is the 033213-10-1 hose mender brand new or a repair part? Part 033213-10-1 is a new Moeller hose mender fitting sold specifically for repairing existing 3/8 inch fuel hose, not a full replacement hose.

Can the 033213-10-1 be used on any type of hose? The Moeller 033213-10-1 is designed for 3/8 inch fuel hose repair; it is not sized for the 1/4 inch or 5/16 inch hose that Moeller's other mender part numbers cover.

How many hose clamps come with this mender? Two stainless steel hose clamps are included with each Moeller 033213-10-1 hose mender, one for each side of the splice.

What is the difference between the 033213-10-1 and Moeller's other hose mender sizes? The 033213-10-1 is the 3/8 inch version; Moeller also produces this mender in a 1/4 inch size and a 5/16 inch size under different part numbers, so the hose diameter is the key distinction between them.