Moeller Marine 035762-10 Reed Switch Fuel Sending Unit, 11 Inch Tank Depth, Stainless Steel

The Moeller Marine 035762-10 is an electrical reed switch fuel sending unit built for boats with fuel tanks 11 inches deep. Unlike swingarm-style senders, this reed switch design takes its fuel measurement from a float traveling along the sender body, which collects fuel level information more consistently than swingarm senders that can be affected by fuel-slosh fluctuations. The sending unit is constructed of stainless steel for durability in a marine fuel tank environment and is finished in black.

Electrically, the sender operates on a normally open, 1-way reed switch circuit with a screw terminal connector for wiring, and it mounts through the top of the tank using a plunger-style actuator. It carries an IP54 ingress protection rating and is fire-rated, meeting the requirements of ISO 10088 and ISO 8846 as well as ABYC H-24. The sender is suitable for use with gasoline, ethanol, diesel, bio-diesel, and non-potable water.

Correct sizing is critical for accurate readings: the sending unit must be one inch (25.4 mm) shorter than the actual tank depth, so this 11 inch (254 mm) unit is intended for tanks with an 11 inch depth. It comes complete with a gasket and mounting screws for installation.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 035762-10
• Sender Length: 11 inches (254 mm)
• Required Tank Depth: Sender must be 1 inch (25.4 mm) shorter than tank depth
• Operation Mode: Electrical
• Switch Type: Reed switch
• Contact Type: Normally open
• Circuit Type: 1-way
• Connector Type: Screw terminal
• Mounting Type: Top mount
• Actuator Type: Plunger
• Material: Stainless steel
• Color: Black
• Ingress Protection Rating: IP54
• Compliance: ABYC H-24, ISO 10088, ISO 8846 (fire-rated)
• Fluid Compatibility: Gasoline, ethanol, diesel, bio-diesel, non-potable water
• Weight: 0.6 pounds
• UPC: 739729000021

Fitment

Designed for fuel tanks with an 11 inch (254 mm) depth. As a general rule for this sender family, the unit must be one inch (25.4 mm) shorter than the tank's actual depth for accurate readings, so verify tank depth before ordering.

Frequently Asked Questions

What tank depth does the Moeller 035762-10 fit? This sending unit is 11 inches (254 mm) long and is sized for fuel tanks with an 11 inch depth, since the sender must be 1 inch (25.4 mm) shorter than the actual tank depth.

How does this sending unit measure fuel level? The 035762-10 uses a reed switch and float that travels along the sender body, which collects fuel level information more consistently than swingarm-style senders that can be thrown off by fuel-slosh fluctuations.

What is the electrical configuration of this sender? The 035762-10 is a normally open, 1-way reed switch circuit that connects via a screw terminal connector.

Is this fuel sending unit compatible with ethanol fuel? Yes, the Moeller 035762-10 is suitable for gasoline, ethanol, diesel, bio-diesel, and non-potable water.

What material is the 035762-10 sending unit made of? It is constructed of stainless steel and finished in black.

Does this sender meet fire safety standards? The 035762-10 is fire-rated and meets the requirements of ISO 10088 and ISO 8846, and it complies with ABYC H-24.

How does the 035762-10 mount to the fuel tank? It is a top-mount sending unit with a plunger-style actuator.

What is included with the Moeller 035762-10? The sending unit comes complete with a gasket and mounting screws for installation.

What ingress protection rating does this sender have? The 035762-10 carries an IP54 ingress protection rating.

How much does the Moeller 035762-10 weigh? This sending unit weighs 0.6 pounds.

Where is fuel level measured from on this sender? Fuel measurements on the 035762-10 are taken from the float, rather than from a swingarm mechanism.

Are other tank depths available in this sender line? The 035762-10 is the 11 inch (254 mm) length version; other lengths in this series are sold under different Moeller part numbers for different tank depths.