Moeller Marine 7.0 Liter / 7.2 Quart Fluid Extractor Oil Change Pump, Model 035340

The Moeller 7.0 Liter Fluid Extractor (035340) is a manual, dual action vacuum pump designed to remove oil from an engine's crankcase without the mess of a traditional drain-and-catch setup. The dual action design pumps fluid on both the upstroke and downstroke, so it clears the sump faster than single-action extractors, and it works equally well on warm or cold oil. Because it operates entirely by hand, there is no need for electric power or a compressed air source, making it a convenient option for boats, garages, or anywhere shop air isn't available.

An automatic shut-off float inside the reservoir stops fluid intake once the tank reaches capacity, preventing overflow. A manual pressure relief valve lets you release built-up vacuum in a controlled way, so removing the fill hose after extraction stays gulp-free and mess-free. The extractor holds 7.2 quarts (7.0 liters) of used oil, giving it enough capacity for a full oil change on most inboard and I/O marine engines and many automotive engines in one pass. Moeller offers this Fluid Extractor line in two sizes, 5 liter and 7 liter, so buyers can match the tank to the volume of oil their engine holds.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 035340
• Capacity: 7.2 Quarts / 7.0 Liters
• Dimensions: 9.5 in. L x 14.9 in. W x 18.03 in. H (241 mm L x 379 mm W x 458 mm H)
• Weight: 5.25 pounds
• Color: White
• Power Source: Manual, no electric or air power required
• Pump Action: Dual action (upstroke and downstroke)
• Special Features: Automatic shut-off float, manual pressure relief valve
• Filter Type: Cloth
• UPC: 739729012963

Frequently Asked Questions

How much oil does the Moeller 035340 Fluid Extractor hold? The Moeller 035340 Fluid Extractor holds 7.2 quarts (7.0 liters), enough capacity for a full oil change on most engines in a single pass.

Does this extractor need electricity or an air compressor to run? No. The 035340 is a fully manual, dual action vacuum pump that requires no electric power or compressed air to operate.

Can I use the Moeller Fluid Extractor to pump gasoline? The dossier for the Moeller 035340 does not list gasoline as an approved fluid, so it should only be used for its intended purpose of extracting engine oil.

What stops the tank from overflowing during extraction? An automatic shut-off float built into the 035340 Fluid Extractor stops fluid intake once the tank reaches capacity, preventing overflow.

How do I release the vacuum after pumping oil out? A manual pressure relief valve on the 035340 lets you release built-up vacuum before removing the fill hose, so the process stays gulp-free and mess-free.

Does the dual action pump work faster than a single-action extractor? Yes, the Moeller 035340 uses a dual action design that draws fluid on both the upstroke and downstroke, moving oil out faster than a single-action pump.

Can this extractor pump cold oil, or does the oil need to be warm first? The 035340 Fluid Extractor is designed to extract both warm and cold oil, so a pre-warm-up is not required.

What are the dimensions of the Moeller 035340 unit? The 035340 Fluid Extractor measures 9.5 in. L x 14.9 in. W x 18.03 in. H (241 mm x 379 mm x 458 mm).

How much does the Moeller 7.0 Liter Fluid Extractor weigh? The Moeller 035340 Fluid Extractor weighs 5.25 pounds.

Does Moeller make this Fluid Extractor in a different size? Yes, the Fluid Extractor line is available in two sizes, 5 liter and 7 liter; the 035340 is the 7.2 quart / 7.0 liter version.

What color is the Moeller 035340 Fluid Extractor? The 035340 Fluid Extractor is white.

Is the Moeller 035340 a genuine Moeller product? Yes, the 035340 is a genuine Moeller Marine part, identified by its Moeller manufacturer part number 035340.