Moeller Marine Fuel Tank Sending Unit 035725-10, 4-28 Inch Tank Depth, 33-240 Ohm

The Moeller Marine 035725-10 is a fuel tank sending unit built to monitor fuel level on boat tanks with a depth of 4 to 28 inches (102 to 685 mm). The float arm travels through this depth range and converts the fuel level reading into an electrical resistance signal of 33 to 240 ohms, which is the standard calibration used by dash-mounted electric fuel gauges. This sending unit is designed to work with a dash-mounted gauge, which is sold separately and installed at the helm to give the operator a real-time fuel level reading.

The float rod assembly measures 1 5/8 inches in diameter and mounts to the fuel tank using a standard SAE 5-hole bolt pattern, allowing it to install into any tank deck plate machined to that pattern. The unit is constructed of composite material for corrosion resistance in a marine fuel environment. A mounting gasket and screws are included with the sending unit so it is ready to install without needing to source separate hardware.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 035725-10
• Tank Depth Range: 4 to 28 inches (102 to 685 mm)
• Float Rod Diameter: 1 5/8 inches
• Resistance / Calibration Range: 33 to 240 ohms
• Mounting Pattern: SAE 5-hole
• Material: Composite
• Included Hardware: Gasket and screws
• Compatibility: Requires a dash-mounted electric fuel gauge (sold separately)
• Weight: 0.2 pounds

Frequently Asked Questions

What tank depth does the Moeller 035725-10 fit? The 035725-10 is calibrated for fuel tanks with a depth of 4 to 28 inches (102 to 685 mm), covering a wide range of tank sizes with a single float rod.

Does this sending unit come with a fuel gauge? No, the dash-mounted gauge is sold separately. The 035725-10 is the sending unit only, which sends a resistance signal to a gauge installed at the helm.

What ohm range does the 035725-10 sending unit use? It is calibrated to the standard 33 to 240 ohm range used by dash-mounted electric fuel gauges.

What mounting pattern does this sending unit use? The Moeller 035725-10 uses a standard SAE 5-hole mounting pattern to bolt into the tank deck plate.

Is mounting hardware included with the 035725-10? Yes, a gasket and mounting screws are included with the sending unit.

What is the diameter of the float rod on the 035725-10? The float rod diameter is 1 5/8 inches.

What material is the Moeller 035725-10 made of? It is made of composite material, chosen for its resistance to corrosion in a marine fuel tank environment.

How much does the 035725-10 sending unit weigh? The sending unit weighs 0.2 pounds.

Will the 035725-10 work with any dash-mounted fuel gauge? It is compatible with dash-mounted electric fuel gauges that read the standard 33 to 240 ohm range, which is the calibration used by the 035725-10.

What brand is the 035725-10 sending unit? It is manufactured by Moeller, a marine fuel system parts maker.