What does an Onyx Re-Arm Kit include?

Each kit includes a 24 gram CO2 cylinder with a bayonet fitting and a yellow water-soluble bobbin, the two parts needed to reset an Onyx automatic inflatable life jacket after it has been triggered.

Which model do I need - A-24 or A/M-24?

Check the model number on your life jacket's label: choose the A-24 In-Sight kit for Model 1332, or the A/M-24 kit for Models 1320, 1321, and M-24 In-Sight.

Will this kit work on other Onyx inflatable life jacket models?

No. Each kit is built for its specific Onyx model, since the CO2 cylinder gram weight and bobbin differ between models. Match the part number to your jacket's model before ordering.

What size CO2 cylinder is used in these kits?

Both kits use a 24 gram CO2 cylinder with a bayonet fitting.

Is the bobbin included water soluble?

Yes, the yellow bobbin included with each kit is water soluble, which is what allows the life jacket to inflate automatically on water contact.

How do I know if my life jacket needs a re-arm kit?

If your Onyx automatic inflatable life jacket has fired (inflated) or you've inspected it and found the CO2 cylinder used or the bobbin dissolved, it needs a re-arm kit before its next use.

Where is the model number located on my life jacket?

The model number is printed on the manufacturer's label sewn inside the life jacket, typically near the inflation chamber or on the inner panel.

Can I install the re-arm kit myself?

Yes, Onyx re-arm kits are designed for simple owner installation by unscrewing the old cylinder and bobbin from the inflator mechanism and threading in the new ones, following the instructions included with the jacket.

Onyx Inflatable Life Vest Re-Arm Kit - 24g CO2

Onyx Inflatable Life Vest Re-Arm Kit - 24 Gram CO2 Cylinder, A-24 and A/M-24 In-Sight Models

$24.71

Keep your Onyx automatic inflatable life jacket ready for the next time it counts. This Re-Arm Kit is the exact factory replacement kit needed after your Onyx auto-inflatable PFD has fired, giving you back a fully armed, water-ready life vest in minutes without buying a new jacket. Each kit bundles the single-use 24 gram CO2 cylinder and the water-soluble bobbin that trigger automatic inflation on water contact, matched to the specific Onyx model it re-arms.

Specifications

Brand: Onyx
CO2 Cylinder Size: 24 gram
Cylinder Fitting: Bayonet
Bobbin: Yellow, water soluble
Outer Material: Vinyl
Lining: Neoprene
Unit Count: 1 kit
Country of Origin: Made in the USA

Sizes & Options

This re-arm kit is sold in two model-specific versions - always match the kit to the life jacket model printed on your vest's label, since the cylinder and bobbin are not interchangeable between Onyx inflatable models. Choose the A-24 In-Sight kit for Model 1332, or the A/M-24 kit for Models 1320, 1321, and M-24 In-Sight. Using the wrong kit can prevent the jacket from inflating correctly, so double-check the model number before ordering.

Onyx Inflatable Life Vest Re-Arm Kit - 24 Gram CO2 Cylinder, A-24 and A/M-24 In-Sight Models

Specifications

Sizes & Options

You may also like

Join our email list

Your cart is empty

Your cart is empty