Sea-Dog Stainless Steel Butt Hinge 201071-1, 1-1/2 x 2 Inch, Sold as Pair

The Sea-Dog 201071-1 is a stamped 304 stainless steel butt hinge made for doors, hatches, cabinets, and lockers where a corrosion resistant, flush-mounted hinge is required. Each unit consists of two rectangular leaves that attach to the abutting surfaces of a door and its jamb, with a barrel connecting the leaves along a 1/16 inch thick pin joint. The hinge is designed to be mortised into the surrounding surface so the leaves sit flush once installed, giving a clean finished look rather than a hinge that stands proud of the door face.

Construction is stamped 304 stainless steel, chosen for its resistance to corrosion in marine and high-moisture environments. The leaves measure 1-1/2 inches by 3/4 inches and 3/4 inches by 2 inches with a 1/16 inch leaf thickness, and the hinge mounts using four #8 FH (flat head) fasteners, which are not included. This hinge is sold as a matched pair (two hinges per unit), which is the standard configuration for supporting a single door or hatch. It is a general-purpose hardware item suited to boat cabinetry, lockers, hatches, and interior doors wherever a compact, corrosion resistant butt hinge is needed.

Specifications

• Brand: Sea-Dog
• Manufacturer Part Number: 201071-1
• Material: Stamped 304 Stainless Steel
• Product Type: Butt Hinge
• Leaf Dimension A: 1-1/2 inches
• Leaf Dimension B: 3/4 inches
• Leaf Dimension C: 3/4 inches
• Leaf Dimension D: 2 inches
• Leaf Thickness (E): 1/16 inch
• Fastener Type: #8 FH (flat head), not included
• Fasteners Required: 4
• Weight: 0.138 pounds
• Sold As: Pair (2 hinges)
• Standard Pack: 10 pairs
• Finish: Unfinished
• Mounting Type: Door Mount
• UPC: 035514201889

Frequently Asked Questions

What is the Sea-Dog 201071-1 hinge used for? It is a butt hinge for mounting doors, hatches, cabinets, or lockers, with two leaves that attach to the abutting surfaces of a door and its jamb and mortise in for a flush installation.

What size is this hinge? The 201071-1 leaves measure 1-1/2 inches by 3/4 inches and 3/4 inches by 2 inches, with a 1/16 inch leaf thickness.

What material is the 201071-1 hinge made from? Stamped 304 stainless steel, chosen for corrosion resistance in marine and high-moisture environments.

Does the 201071-1 come with mounting screws? No, fasteners are not included. It installs with four #8 FH (flat head) screws that must be purchased separately.

Is the 201071-1 sold as a single hinge or a pair? It is sold as a pair, two matching hinges per unit, which is the standard configuration for supporting one door or hatch.

How much does the 201071-1 hinge weigh? The pair weighs 0.138 pounds.

Will this hinge hold up in a marine environment? Yes, the 201071-1 is made of stamped 304 stainless steel, which resists corrosion in saltwater and humid conditions.

Does the 201071-1 need to be mortised into the door? Yes, it is designed to be mortised for a flush installation so the leaves sit level with the surrounding surface rather than standing proud.

How is the 201071-1 different from Sea-Dog's other butt hinge sizes? The 201071-1 has 1-1/2 by 3/4 inch and 3/4 by 2 inch leaves; Sea-Dog offers this same style of hinge in other leaf sizes under different part numbers, so check your opening dimensions before ordering.

What finish does the 201071-1 have? It has an unfinished stainless steel finish.

Can the 201071-1 be used on cabinets as well as doors? Yes, this door-mount butt hinge is suitable for cabinets, lockers, hatches, and interior doors in addition to standard doors.

How thick is the leaf on the 201071-1 hinge? The leaf thickness is 1/16 inch.