Sea-Dog Premium Electric Oil Change Pump 501072-3, 12V Portable Pump for Outboard and Sterndrive Dipstick Oil Changes

The Sea-Dog Premium Electric Oil Pump (501072-3) is a portable, lightweight 12V pump built for draining engine oil through the dipstick tube on outboard and sterndrive engines. The self-priming pump attaches directly to a battery's terminals using alligator clips, so no wiring or installation is required to start a change. It comes with a 48 inch inlet hose and an 80 inch outlet hose, giving enough reach to position the pump next to the battery while the outlet hose runs to a collection container.

Construction is injection molded nylon, keeping the pump light and corrosion resistant for use in a marine environment. The motor runs on 12VDC at 60W and is rated for a maximum run time of 30 minutes per session. It moves oil at a rate of 0.84 quarts per minute at 140 degrees F (0.8 liters per minute at 60 degrees C), and can also be used to pump diesel at 1.9 quarts per minute at 75 degrees F (1.8 liters per minute at 23 degrees C). This pump is intended for DIY use and is not designed for commercial use, and it is not suitable for pumping transmission oil, water, or flammable liquids.

Specifications

• Brand: Sea-Dog
• Manufacturer Part Number: 501072-3
• Material: Injection Molded Nylon
• Power Source: 12VDC, battery powered via alligator clips
• Wattage: 60W
• Maximum Run Time: 30 minutes
• Oil Flow Rate: 0.84 quarts per minute at 140 degrees F (0.8 liters per minute at 60 degrees C)
• Diesel Flow Rate: 1.9 quarts per minute at 75 degrees F (1.8 liters per minute at 23 degrees C)
• Inlet Hose Length: 48 inches
• Outlet Hose Length: 80 inches
• Inlet Tube Diameter: 1/4 inch
• Weight: 2.13125 pounds
• Standard Pack: 1 each
• UPC: 035514501033

Fitment

Designed to drain oil through the dipstick tube on outboard and sterndrive engines. Not intended for commercial use, and not suitable for pumping transmission oil, water, or flammable liquids.

Frequently Asked Questions

What comes with the Sea-Dog 501072-3 Electric Oil Pump? The Sea-Dog Premium Electric Oil Pump 501072-3 ships with a 48 inch inlet hose and an 80 inch outlet hose, along with the pump body and battery alligator clips.

How is the pump powered? It runs on 12VDC at 60W and connects to a battery's terminals using alligator clips, with no wiring installation required.

What is the oil flow rate of this pump? The 501072-3 moves oil at 0.84 quarts per minute at 140 degrees F (0.8 liters per minute at 60 degrees C).

Can this pump be used with diesel? Yes, the Sea-Dog 501072-3 pumps diesel at a rate of 1.9 quarts per minute at 75 degrees F (1.8 liters per minute at 23 degrees C).

What is the pump made of? It is built from injection molded nylon, keeping the 501072-3 lightweight and resistant to corrosion.

Is this pump suitable for commercial use? No, the Sea-Dog Premium Electric Oil Pump is not intended for commercial use.

Can it pump water or transmission fluid? No, the 501072-3 is not suitable for pumping transmission oil, water, or flammable liquids.

What engines is this pump designed for? It is designed to drain oil through the dipstick tube on outboard and sterndrive engines.

How much does the Sea-Dog 501072-3 weigh? This pump weighs 2.13125 pounds.

How long can the pump run continuously? Maximum run time for the 501072-3 is 30 minutes per session.

How does the pump attach for power during use? Alligator clips connect the 501072-3 directly to a battery's terminals, and the self-priming pump draws power from there to move oil.

How does this differ from a manual oil change pump? The Sea-Dog 501072-3 is a self-priming 12V electric pump, while a manual oil change pump requires hand-operated pumping to move oil through the dipstick tube.