SeaStar Control Cable CC17007, 7-Foot 400 Type, Pre-1979 OMC/Johnson/Evinrude with BRP/OMC Controls

The SeaStar CC17007 is a 400 type control cable engineered as a drop-in replacement for pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP/OMC control heads. It uses the existing connection components at both the helm and engine, so no modification to the control head is required. The cable measures 7 feet and is built with stainless steel terminals and fittings, along with stainless or nylon covered core wires, all protected by moisture seals to resist corrosion. The outer jacket is a durable HDPE material that withstands abrasion, UV exposure, salt water, chemicals, gasoline, and oil, and the cable carries an 8 inch minimum bend radius. Every SeaStar control cable is lubricated for life at the factory, environmentally tested for marine use, and manufactured to exceed the engine manufacturer's specifications. It also meets ABYC safety standards and ISO/IMCI/NMMA certification requirements. Before ordering, confirm the CC17007 is the correct length and connection type for your specific control head, as control cables are not interchangeable across brands or connector styles.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CC17007
• Type: 400 type (standard)
• Length: 7 feet
• Fitment: Pre-1979 OMC/Johnson/Evinrude with BRP/OMC controls
• Outer Jacket Material: HDPE
• Terminal Material: Stainless steel
• Core Wire: Stainless or nylon covered
• Minimum Bend Radius: 8 inches
• Weight: 1.04 pounds
• Country of Origin: United States
• Certification: Exceeds ABYC safety standards; meets ISO/IMCI/NMMA certification requirements
• Warranty: Two-year recreational user warranty

Fitment

Pre-1979 OMC/Johnson/Evinrude outboards with BRP/OMC controls.

Replaces (OEM)

No specific OEM cross-reference numbers are listed for this part; it is designed as a direct-fit replacement control cable for the fitment above.

Frequently Asked Questions

What does the SeaStar CC17007 fit? The CC17007 is a 400 type control cable made for pre-1979 OMC, Johnson, and Evinrude outboards that use BRP/OMC control heads.

How long is this control cable? The CC17007 measures 7 feet, and buyers should confirm this length matches their existing cable run before ordering since control cables are not adjustable after installation.

Is the CC17007 a genuine OEM part or aftermarket? It is a SeaStar branded, OEM direct-replacement type cable built to use the same connection components as the original equipment cable it replaces.

What is the outer jacket made of? The CC17007 has a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.

What material are the terminals and core wire? Stainless steel terminals and fittings are used on the CC17007, with a stainless or nylon covered core wire and moisture protective seals for corrosion resistance.

Does the CC17007 come pre-lubricated? Yes, SeaStar control cables including the CC17007 are lubricated for life at the factory, so no additional greasing is needed at installation.

What is the minimum bend radius for this cable? The CC17007 has an 8 inch minimum bend radius, which should be maintained when routing the cable to avoid kinking or binding.

Does this cable meet any safety standards? The CC17007 exceeds ABYC safety standards and meets ISO/IMCI/NMMA certification requirements for marine control cables.

Is the CC17007 covered by a warranty? SeaStar backs the CC17007 with a two-year recreational user warranty against manufacturing defects.

Can the CC17007 be used with Mercury or Mariner controls? No, the CC17007 is specified for pre-1979 OMC/Johnson/Evinrude applications with BRP/OMC controls; different SeaStar cable numbers cover Mercury and Mariner control setups.

How much does the CC17007 weigh? The CC17007 control cable weighs 1.04 pounds.

Where is the CC17007 manufactured? The CC17007 is made in the U.S.A. By SeaStar.