SeaStar CC21017 630 Type Control Cable, 17 Feet - Mariner Pre-1993 40 HP and Under with Mariner/Mercury Controls
SeaStar CC21017 630 Type Control Cable, 17 Feet - Mariner Pre-1993 40 HP and Under with Mariner/Mercury Controls
The SeaStar CC21017 is a 17 foot 630 type control cable engineered for Mariner outboards built before 1993 in the 40 HP and under range that use Mariner/Mercury controls. It transmits throttle and shift motion from the control head to the engine through a 10-32 threaded terminal and clamp-type fitting at each end, so it works with the existing connection components on compatible controls rather than requiring new hardware.
Construction centers on a stainless steel Lubri-Core wire inside a long-wearing HDPE liner that is lubricated for life, with stainless steel terminals and conduit fittings and moisture protective seals at each wire for corrosion resistance. The outer jacket resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil, and the cable is built with an 8 inch minimum bend radius and 3 inches of end rod travel. SeaStar states that this cable exceeds the engine manufacturer's specifications and that its control cables are environmentally tested for marine applications and meet ABYC safety standards and ISO/IMCI/NMMA certification requirements.
This is the standard 630 type cable; SeaStar also offers an XTREME premium version of the same cable type for applications where minimum lost motion at the control is a priority. The CC21017 is made in the U.S.A. And is lubricated at the factory for the life of the cable.
Specifications
- Brand: SeaStar
- Manufacturer Part Number: CC21017
- Cable Type: 630 Type Control Cable (standard)
- Length: 17 feet
- Terminal Thread: 10-32 threaded terminal, clamp-type fitting
- Minimum Bend Radius: 8 inches
- End Rod Travel: 3 inches
- Outer Jacket Material: HDPE (high-density polyethylene)
- Color: Black
- Terminal and Fitting Material: Stainless steel
- Core Wire: Multi-strand stainless steel Lubri-Core wire
- Number of Wires: 2
- Weight: 1.8 pounds
- Country of Origin: Made in the U.S.A.
Fitment
- Mariner (Pre-1993, 40 HP and lower) with Mariner/Mercury controls
Replaces (OEM)
- SeaStar Solutions Control Cable Part Number 032377-3-xxx
Frequently Asked Questions
What engines does the SeaStar CC21017 control cable fit? The CC21017 fits Mariner outboards from before 1993 rated 40 HP and lower that use Mariner/Mercury controls.
How long is the CC21017 control cable? It is a 17 foot control cable, and buyers should verify this is the correct length for their control run before ordering since control cables are not field-adjustable in length.
What OEM part number does the CC21017 replace? The CC21017 replaces SeaStar Solutions Control Cable Part Number 032377-3-xxx.
Is the CC21017 a standard or premium cable? The CC21017 is the standard version of SeaStar's 630 type control cable; a premium XTREME version of the same cable type is also offered for applications where minimum lost motion is important.
What is the CC21017 made of? It uses a multi-strand stainless steel Lubri-Core wire inside an HDPE liner, with stainless steel terminals and conduit fittings and a black HDPE outer jacket.
Does the CC21017 come pre-lubricated? Yes, the CC21017 is lubricated at the factory for the life of the cable and does not require additional lubrication before installation.
What size threaded ends does the CC21017 use? The CC21017 has a 10-32 threaded terminal with a clamp-type fitting at each end, designed to use the existing connection components on compatible controls.
How much does the CC21017 weigh? The CC21017 weighs 1.8 pounds.
Is the CC21017 resistant to weather and fuel exposure? Yes, its HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, and it is environmentally tested for marine applications.
What is the minimum bend radius for the CC21017? The CC21017 has an 8 inch minimum bend radius and 3 inches of end rod travel.
Where is the CC21017 control cable manufactured? The CC21017 is made in the U.S.A.
Does the CC21017 meet marine industry safety standards? SeaStar states its control cables, including the CC21017, exceed the engine manufacturer's specifications and meet ABYC safety standards and ISO/IMCI/NMMA certification requirements.