SeaStar XTREME CCX63332 33C Control Cable, 32 Feet, Dual Station Pull Throttle

The SeaStar CCX63332 is a 32 foot XTREME 3300/33C type control cable built for dual function mechanical engine controls. It uses SeaStar's patented splined core, where ridges on the core create a close fit with the cable's inner liner for smooth movement with minimal lost motion. Each end terminates in a 10-32 threaded terminal with a clamp-type fitting, so the cable connects using existing control and engine connection components without special adapters at the cable end itself.

A 0.34 inch super tough HDPE jacket protects the cable against abrasion, UV exposure, salt water, chemicals, gasoline, and oil. Oil tempered lay wires measuring 0.033 inch give the cable superior strength and performance, while stainless steel terminals and conduit fittings add further corrosion protection. The cable is factory lubricated for life and is made in the U.S.A. Its 4 inch minimum bend radius (versus an 8 inch minimum for standard control cables) makes it well suited to complex or long cable runs, including foot throttle applications on performance and bass boats.

This cable is intended for use with a DS (dual station) unit, and SeaStar Solutions recommends pairing it with the 33C cable in the CCX633XX series when wiring a dual station boat. In a dual station setup, side mount controls can be used with a single station selector for either single engine or dual engine boats; switching stations is done by placing both levers in neutral and turning the selector switch. This particular DS throttle setup is a pull-only configuration; a push throttle application requires the outboard DS throttle unit instead.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CCX63332
• Length: 32 feet
• Cable Type: 3300/33C type control cable
• Terminal Type: 10-32 threaded terminal with clamp-type fitting
• Core Type: XTREME splined, coated core
• Minimum Bend Radius: 4 inches
• Jacket Material: HDPE (Super Tough)
• Jacket Thickness: 0.34 inch
• Lay Wire Diameter: 0.033 inch (oil tempered)
• Terminal/Fitting Material: Stainless steel
• Material: Metal
• Color: Black
• Weight: 4.07 pounds
• Country of Origin: Made in U.S.A.
• UPC: 808282271725

Fitment

The CCX63332 is designed for use with SeaStar dual station (DS) control units and other controls that accept universal type 10-32 threaded cable ends. It is a pull-only cable; applications requiring a push throttle need the outboard DS throttle unit instead.

Replaces (OEM)

No specific OEM replacement part numbers are listed for this cable.

Frequently Asked Questions

What length is the SeaStar CCX63332 control cable? The CCX63332 is 32 feet long, and buyers should verify this is the correct cable length for their application before ordering since control cables are not adjustable after installation.

Is the CCX63332 a push or pull throttle cable? This DS throttle unit cable is a pull-only setup. If a push throttle is needed, the outboard DS throttle unit should be used instead of the CCX63332.

What type of control cable is this? It is a 3300/33C type XTREME control cable, designed for dual function mechanical engine controls and built to accept universal type 10-32 threaded cable ends.

Can the CCX63332 be used in a dual station boat? Yes. This cable is intended for use with a SeaStar DS (dual station) unit, allowing side mount controls to be used in a dual station boat with one station selector serving either a single engine or dual engine setup.

How do you switch stations on a dual station setup using this cable? Both control levers are placed in neutral, and the selector switch is turned to change from one station to the other.

What is the minimum bend radius of the CCX63332 compared to a standard control cable? The CCX63332 has a 4 inch minimum bend radius, versus an 8 inch minimum bend radius for standard control cables, making it better suited to tight or complex cable runs.

What is the cable jacket made of and what does it protect against? The CCX63332 uses a 0.34 inch super tough HDPE jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.

What connection type is on the ends of this cable? Each end of the CCX63332 has a 10-32 threaded terminal with a clamp-type fitting, using the existing connection components on compatible controls.

How much does the SeaStar CCX63332 weigh? The CCX63332 control cable weighs 4.07 pounds.

Where is the CCX63332 control cable manufactured? This SeaStar XTREME control cable is made in the U.S.A.

Does the CCX63332 come pre-lubricated? Yes, the cable is lubricated at the factory for life, so no additional lubrication is required at installation.

What core technology does the CCX63332 use and why does it matter? It uses SeaStar's XTREME splined, coated core, where ridges on the core create a close fit with the cable's inner liner for smooth movement with minimal lost motion compared to standard control cables.