Shrink Wrap International EX6120SE-15 Boat Shrink Wrap Heat Gun, 341,000 BTU Titanium Nozzle, 15-3/4 Inch Neck

The Shrink Wrap International EX6120SE-15 Boat Shrink Wrap Heat Gun is a propane fueled heat source built for shrinking boat shrink wrap film during winterization. Through use of the trigger, this heat gun puts out up to 341,000 BTUs at maximum power and is variable down to 10,000 BTUs, giving control over how quickly and evenly the film shrinks around the vessel. The complete unit includes a quick disconnect trigger handle, a 15-3/4 inch neck, a 60 PSI fixed regulator, a 341,000 BTU titanium nozzle, and a 25 foot hose that connects to a propane tank, keeping the operator at a safe working distance from the flame.

To operate, the regulator is attached to the propane tank and the hose is connected to the torch before the propane is turned on. The torch regulator is then opened just enough to hear gas flow, the torch is lit, and the pilot flame is kept low enough that it will not blow out when the trigger is pulled, but high enough to remain visible at all times, since shrinking should never be done where the flame cannot be seen. The trigger should be released when pausing or changing direction across the shrink wrap surface. Combined with Shrink Wrap International strapping and shrink wrap film, this heat gun forms a complete system for sealing a boat cover before the off-season.

Specifications

• Brand: Shrink Wrap International
• Manufacturer Part Number: EX6120SE-15
• Heat Source: Propane
• Maximum Heat Output: 341,000 BTU
• Minimum Heat Output: 10,000 BTU (variable via trigger)
• Neck Length: 15-3/4 inches
• Hose Length: 25 feet
• Regulator: 60 PSI fixed regulator
• Nozzle Material: Titanium
• Weight: 4.4 pounds
• UPC: 489394319469
• Includes: Quick disconnect handle, 15-3/4 inch neck, 60 PSI fixed regulator, 341,000 BTU titanium nozzle, 25 foot hose

Frequently Asked Questions

What is the maximum heat output of the EX6120SE-15 heat gun? The EX6120SE-15 heat gun puts out up to 341,000 BTUs at maximum power through its titanium nozzle.

Can the heat output be adjusted? Yes, the EX6120SE-15 is variable from 10,000 BTUs up to 341,000 BTUs, controlled through use of the trigger.

What fuel does this heat gun use? The Shrink Wrap International EX6120SE-15 is a propane fueled heat gun rather than an electric heat gun.

What comes included with the EX6120SE-15? This heat gun includes a quick disconnect trigger handle, a 15-3/4 inch neck, a 60 PSI fixed regulator, a 341,000 BTU titanium nozzle, and a 25 foot hose.

How long is the hose on this shrink wrap heat gun? The EX6120SE-15 comes with a 25 foot hose connecting the torch to the propane tank.

How much does the EX6120SE-15 weigh? The Shrink Wrap International EX6120SE-15 heat gun weighs 4.4 pounds.

What is the nozzle made of? The EX6120SE-15 uses a 341,000 BTU titanium nozzle mounted on a 15-3/4 inch neck.

How do I light and use this heat gun? To use the EX6120SE-15, attach the regulator to the propane tank with the propane off, connect the hose to the torch, turn the propane tank fully on, open the torch regulator just enough to hear gas flow, and light the torch to establish a pilot flame; keep the flame low enough that it will not blow out when the trigger is pulled, and release the trigger when pausing or changing direction.

Is it safe to shrink wrap where I cannot see the flame? No, the EX6120SE-15 should never be used to shrink film in a spot where the flame cannot be seen, since the plastic can ignite.

What is this heat gun used for? The EX6120SE-15 is used to shrink boat shrink wrap film around a vessel during winterization, working alongside shrink wrap strapping and film.

Does the EX6120SE-15 require a separate propane tank? Yes, the heat gun's 60 PSI fixed regulator and 25 foot hose are designed to connect to a propane tank, which is supplied separately.