T-H Marine Designer Series Non-Locking Access Hatch, 11 x 19 Inch, Polar White (HDS-1119-2)

The T-H Marine Designer Series Access Hatch, part number HDS-1119-2, is a non-locking boat deck hatch finished in Polar White. It is built with tapered edges and hidden fasteners in the frame for a clean, finished look on the deck, and the lid is secured with cam-style locks that hold it firmly in place without requiring a key. A positive lid seal keeps the compartment below watertight, while stainless steel hinges allow the lid to swing open a full 160 degrees for easy access to gear, wiring, or storage. The lid itself is structurally engineered to be a "walk on" surface, so it can support foot traffic on deck without flexing or cracking. This 11 inch x 19 inch size can be installed either vertically or horizontally depending on the layout of the boat, giving installers flexibility when placing it in a console, gunwale, or deck compartment. Because it ships as an individual replacement or new-install hatch, it drops into the same footprint used across the Designer Series line, so boat builders and owners can standardize hatch cutouts across multiple compartments. The Designer Series is also offered in Black, Sand Shell, and Light Gray for this same 11 x 19 size and in locking versions, each under its own part number, so buyers can match existing hardware or choose the security level they need.

Specifications

• Brand: T-H Marine
• Manufacturer Part Number: HDS-1119-2
• Product Line: Designer Series
• Style: Non-Locking
• Color: Polar White
• Outside Dimensions: 10-7/8 inches x 18-7/8 inches
• Inside Dimensions: 7-5/8 inches x 15-1/2 inches
• Cut-Out Dimensions: 8-1/4 inches x 16-1/8 inches
• Height Above Deck: 5/8 inch
• Hinge Material: Stainless Steel
• Hinge Opening Angle: 160 degrees
• Weight: 4.12 pounds
• UPC: 733572065459

Fitment

This hatch is a universal deck installation sized for an 8-1/4 inch x 16-1/8 inch cutout; it is not tied to a specific boat make or model.

Replaces (OEM)

Not applicable; this is an original T-H Marine Designer Series hatch, not a cross-reference replacement part.

Frequently Asked Questions

What size is the T-H Marine HDS-1119-2 access hatch? HDS-1119-2 has an outside dimension of 10-7/8 inches x 18-7/8 inches and an inside opening of 7-5/8 inches x 15-1/2 inches, making it the 11 x 19 inch size in the Designer Series line.

Is this hatch a locking model? No. HDS-1119-2 is the non-locking version of the Designer Series hatch; the lid is held shut with cam-style locks rather than a key lock. A locking version of the same size is available as a separate part number.

What color is HDS-1119-2? This part number is finished in Polar White. The same 11 x 19 inch Designer Series hatch is also available in Black, Sand Shell, and Light Gray under different part numbers.

How far does the hatch lid open? The stainless steel hinges on the HDS-1119-2 Designer Series hatch allow the lid to open to 160 degrees.

What cutout size do I need to install this hatch? Cut an opening of 8-1/4 inches x 16-1/8 inches in the deck to install the HDS-1119-2 Designer Series hatch.

Can this hatch be mounted vertically or horizontally? Yes, the Designer Series hatch including HDS-1119-2 is designed to be installed either vertically or horizontally depending on the deck layout.

How much does the hatch weigh? The T-H Marine HDS-1119-2 Designer Series hatch weighs 4.12 pounds.

Can I walk on this hatch lid? Yes. The HDS-1119-2 lid is structurally engineered as a "walk on" lid, built to support foot traffic on deck.

Does the hatch seal out water? The HDS-1119-2 Designer Series hatch has a positive lid seal that provides a water tight fit when the lid is closed.

How high does the hatch sit above the deck once installed? The Designer Series hatch, including the HDS-1119-2 model, has an optional height above deck of 5/8 inch.

Are the fasteners visible on the outside of the hatch? No, the HDS-1119-2 Designer Series hatch uses hidden fasteners built into the frame for a finished, tapered-edge look.

Is there a locking version if I need extra security? Yes, T-H Marine offers a locking Designer Series hatch in the same 11 x 19 inch size with a stainless steel lock, sold under a different part number than the non-locking HDS-1119-2.