TACO Marine Gunnel-Mount Striker Base for 1-1/8 Inch Outriggers, F16-0212-F, Stainless Steel Pair

The TACO Marine F16-0212-F Gunnel-Mount Striker Base is a stainless steel outrigger mounting system built for anglers who want to run outriggers without a T-top. Instead of overhead rigging, this system mounts directly to the boat's gunnel, giving offshore trollers a simple, adjustable way to spread lines from the safety and easy reach of the gunnel rather than climbing to a hardtop. It is designed for 1-1/8 inch diameter outrigger poles and carries a 45-degree arm that is ambidextrous, so the same base works on either side of the boat.

Construction is polished Type-316L stainless steel for corrosion resistance in a saltwater environment, with a silver polished finish that keeps a clean, low-profile look on the gunnel. The mounting footprint is compact, keeping visual impact and installation expense to a minimum compared to a full T-top outrigger setup. Note that the arm does not lock into the mount, so it is intended for use at trolling speeds only; outriggers should be returned to the vertical position before running at speed.

This listing is for the Gunnel-Mount Striker Base sold as a pair, so both port and starboard mounting positions are covered in a single purchase. TACO Marine backs the base with a three-year limited warranty.

Specifications

• Brand: TACO Marine
• Manufacturer Part Number: F16-0212-F
• Material: Stainless Steel Type 316L
• Finish: Polished
• Color: Silver
• Outrigger Pole Diameter: 1-1/8 inches
• Arm Angle: 45 degrees
• Mounting Style: Gunnel mount, ambidextrous (fits either side)
• Item Dimensions: 17.25 x 16.25 x 4.5 inches
• Weight: 6.27 pounds
• Quantity: Sold in pairs
• Warranty: Three-year limited
• UPC: 630838009892

Fitment

• Fits 1-1/8 inch diameter outrigger poles
• Ambidextrous 45-degree arm mounts to either the port or starboard gunnel
• Intended for trolling speeds; outriggers should be vertical before the boat reaches running speed

Frequently Asked Questions

What size outriggers does the TACO Marine F16-0212-F fit? The F16-0212-F Gunnel-Mount Striker Base is sized for 1-1/8 inch diameter outrigger poles.

Does this mount work on both the port and starboard side? Yes, the F16-0212-F arm is ambidextrous with a 45-degree angle, so the same base mounts on either the port or starboard gunnel.

How many mounts come in this purchase? The F16-0212-F Gunnel-Mount Striker Base is sold in pairs, covering both gunnel positions in one order.

What material is the F16-0212-F made from? It is built from polished Type-316L stainless steel, chosen for corrosion resistance in saltwater use.

Can I run outriggers at full speed with this mount installed? No. The F16-0212-F arm does not lock into the mount, so it is intended for trolling speeds only; outriggers should be placed in the vertical position when the boat is running.

How much does the F16-0212-F Gunnel-Mount Striker Base weigh? The pair weighs 6.27 pounds total.

What are the overall dimensions of this outrigger mount? The F16-0212-F measures 17.25 x 16.25 x 4.5 inches as packaged.

How is this different from a T-top outrigger mount? The F16-0212-F mounts to the boat's gunnel rather than a T-top or hardtop, giving a simpler, lower-cost installation with minimal visual impact on the boat.

What finish does the F16-0212-F have? It has a polished silver stainless steel finish.

Is the F16-0212-F genuine TACO Marine, and does it carry a warranty? Yes, the F16-0212-F is a genuine TACO Marine product and is backed by a three-year limited warranty.

What is included when I order the F16-0212-F? The order includes the pair of TACO Marine F16-0212-F Gunnel-Mount Striker Bases with the 45-degree ambidextrous arms.