Tie Down Engineering Male T Connector, Commercial Grade with 3/4 in. Tab, Part 26408

The Tie Down Engineering Male T Connector, part number 26408, is a Commercial Grade dock hardware fitting used to join dock sections, fingers, and ramps into a stable connection point. It is built with a single welded 3/4 in. Tab that mates with a Female T Connector to create the joint, and it uses a.562 in. Square hole pattern spaced 3.5 in. On center to match Commercial Grade dock framing. This Male T Connector measures 5 x 5 x 1 inches and weighs 2.7 pounds, giving it the mass and bearing surface needed for repeated foot traffic and boat loading at a marina or private dock. A bolt set (bolt set "N") is required to complete the joint and is ordered separately. Because this is the Commercial Grade version, it is sized and drilled to work with other Commercial Grade Tie Down Engineering dock hardware rather than the Standard Grade line, which uses a smaller.438 in. Hole pattern. This connector is intended for dock builders and marina maintenance crews assembling or repairing modular floating or fixed dock systems, anywhere a finger, ramp, or side section needs to attach at a T-shaped junction. Pair it with the matching Female T Connector to complete the connection.

Specifications

• Brand: Tie Down Engineering
• Manufacturer Part Number: 26408
• Grade: Commercial Grade
• Tab: One welded 3/4 in. Tab
• Hole Pattern:.562 in. Square holes, 3.5 in. On center
• Product Dimensions: 5 x 5 x 1 inches
• Weight: 2.7 pounds
• UPC: 081628264081
• Package Quantity: 1

Fitment

Universal Commercial Grade dock hardware; designed to connect with Tie Down Engineering Commercial Grade dock sections, fingers, and ramps using the.562 in. Square hole pattern on 3.5 in. Centers.

Frequently Asked Questions

What is the Tie Down Engineering Male T Connector used for? Part number 26408 is a Commercial Grade dock hardware fitting used to join dock sections, fingers, or ramps at a T-shaped connection point.

What size is the Male T Connector, part 26408? It measures 5 x 5 x 1 inches and weighs 2.7 pounds.

Does the 26408 connector work with Standard Grade dock hardware? No. The 26408 is Commercial Grade with a.562 in. Square hole pattern on 3.5 in. Centers, which differs from the Standard Grade hole pattern of.438 in. Square holes, so it should be matched with other Commercial Grade components.

How does the Male T Connector attach to the dock? It has one welded 3/4 in. Tab that mates with a Female T Connector, and a bolt set (bolt set "N") is required to complete the joint; the bolt set is ordered separately.

Is the Female T Connector included with part 26408? No, part 26408 is the Male T Connector only. The mating Female T Connector is a separate part with its own part number.

What is the hole spacing on the 26408 T Connector? The hole pattern is.562 in. Square holes spaced 3.5 in. On center.

What grade is the Tie Down Engineering 26408 connector? It is the Commercial Grade version, built for heavier-duty dock applications than the Standard Grade line.

How many tabs does the Male T Connector have? The 26408 Male T Connector has one welded 3/4 in. Tab.

Is a bolt set included with the Male T Connector? No. Joining the 26408 Male T Connector to a Female T Connector requires bolt set "N", which is purchased separately.

Is this a genuine Tie Down Engineering part? Yes, part 26408 is a genuine Tie Down Engineering Male T Connector, not an aftermarket equivalent.