Tie Down Engineering 95035 #4 Fluke Anchor, 240 lb Holding Capacity for Boats 12-16 ft

The Tie Down Engineering 95035 is a #4 fluke anchor built for boats in the 12-16 ft range, with a 240 lb rated holding capacity for everyday anchoring in a variety of bottom conditions. Fluke-style anchors like the 95035 use wide, angled flukes that dig into sand, mud, and similar bottoms to resist dragging once set, making them a common choice for small to mid-size runabouts, jon boats, and similar craft.

The 95035 features strong, wide flukes designed to penetrate quickly and firmly for maximum holding power. Its crown is fully welded, giving the anchor properly engineered angles for secure penetration and consistent setting. The entire anchor is hot-dip galvanized after fabrication, which coats every surface (including welds) in zinc for corrosion resistance in fresh and salt water. Each Tie Down Engineering anchor is marked with a model number that approximates its weight in pounds, so the 95035 designation corresponds to an anchor weighing approximately 4 pounds (actual shipping weight 4.11 pounds).

Measuring 17-1/4 in. Long, 13 in. Wide, and 9 in. High, the 95035 is sized as a #4 model recommended for boats 12-16 ft in length. It is sold as a standalone anchor for boaters who need a durable, galvanized fluke anchor matched to their boat size and typical anchoring loads.

Specifications

• Brand: Tie Down Engineering
• Manufacturer Part Number: 95035
• Product Type: Fluke Anchor
• Model Size: #4
• Working Load / Holding Capacity: 240 lbs.
• Recommended Boat Length: 12-16 ft.
• Weight: 4.11 pounds
• Length: 17-1/4 in.
• Width: 13 in.
• Height: 9 in.
• Material: Galvanized Steel
• Finish: Hot-Dip Galvanized
• UPC: 081628950359

Fitment

• Recommended for boats 12-16 ft. In length
• Rated for 240 lbs. Of holding capacity

Frequently Asked Questions

What size boat is the Tie Down Engineering 95035 anchor designed for? The 95035 is a #4 model recommended for boats 12-16 ft. In length.

How much holding power does the 95035 anchor provide? The 95035 is rated for 240 lbs. Of holding capacity, based on its #4 model classification.

How much does the 95035 anchor weigh? The Tie Down Engineering 95035 weighs 4.11 pounds.

What are the dimensions of the 95035 fluke anchor? The 95035 measures 17-1/4 in. Long, 13 in. Wide, and 9 in. High.

What is the 95035 anchor made of and how is it finished? The 95035 is constructed of galvanized steel and is hot-dip galvanized after fabrication, coating all surfaces including welds for corrosion resistance.

Is the crown of the 95035 anchor welded or cast? The 95035 has a fully welded crown, engineered with proper angles for secure penetration and holding power.

Why is the 95035 anchor marked with the number 4? Tie Down Engineering marks each anchor with a model number, such as the #4 designation on the 95035, that approximates the anchor's weight in pounds.

What type of anchor is the 95035? The 95035 is a fluke-style anchor, using wide flukes that penetrate the bottom quickly and firmly for maximum holding power.

Will the 95035 anchor hold up in saltwater use? Yes, the 95035 is hot-dip galvanized after fabrication, which provides corrosion resistance suited to saltwater and freshwater environments.

What comes with the Tie Down Engineering 95035? The 95035 is sold as a standalone fluke anchor; it does not include rope, chain, or a shackle.

How is the 95035 different from the larger 95040 anchor? The 95035 is the #4 model rated for 240 lbs. Holding capacity on boats 12-16 ft., while the larger #8 model is rated for 480 lbs. On boats 16-24 ft.