Trac 7-Liter Fluid/Oil Change Pump, Self-Priming Marine Oil Extractor (69362, Replaces T10064)

The Trac 7-Liter Fluid/Oil Change Pump is a self-priming, tank-style extractor built for oil changes and the removal of coolant, fuel, and transmission fluid on motors, watercraft, and vehicles. It creates a powerful vacuum to draw out almost any non-corrosive liquid, giving you a cleaner way to drain engines with hard-to-reach drain plugs. Beyond oil changes, the pump doubles as a way to pump out bilge water and other trapped fluids.

The kit uses two different sized extraction tubes for different tasks. The black extraction tube (0.34 inch / 11/32 inch outer diameter, 8 feet long) is designed to be inserted down the dipstick tube to reach the bottom of the crank case, while the clear drain tube (0.50 inch / 1/2 inch inner diameter, 8 feet long) routes the extracted fluid into the 7-liter (7.5-quart) tank. A cap, adapters, and hoses are included so the pump works across a wide range of motors and vehicles. A tube clamp built into the unit keeps both hoses coiled and organized for storage between uses, and the tank-style body lets you actuate the pump handle to build and maintain vacuum until the fluid is fully extracted.

To use, run the engine about 10 minutes to warm the oil (never extract hot oil), remove the dipstick, insert the black tube into the dipstick tube, attach the rubber tube coupler to the pump inlet, and actuate the pump handle in 20-second intervals to draw the fluid out. This pump is not intended for corrosive fluids such as acids.

Specifications

• Brand: Trac
• Manufacturer Part Number: 69362
• Tank Volume: 7 Liters (7.5 Quarts)
• Weight: 3.43125 pounds
• Product Dimensions: 9.3 x 1.5 x 20.5 inches
• Power Source: Manual
• Color: Black
• Black Extraction Tube Outer Diameter: 0.34 inches (11/32 inch)
• Black Extraction Tube Length: 8 feet
• Clean Drain Tube Inner Diameter: 0.50 inches (1/2 inch)
• Clean Drain Tube Length: 8 feet
• Included Components: Cap, Adapters, (2) Hoses
• Warranty: 1 year manufacturer warranty
• UPC: 666996100645

Replaces (OEM)

• T10064

Frequently Asked Questions

What is the tank capacity of the Trac 69362 fluid pump? The Trac 7-Liter Fluid/Oil Change Pump (69362) holds 7 liters, which is 7.5 quarts.

Can this pump be used for fluids other than engine oil? Yes, the Trac 69362 is designed for oil changes as well as removing coolant, fuel, transmission fluid, bilge water, and other trapped non-corrosive fluids.

Is the Trac 7-Liter pump self-priming? Yes, it is a self-priming, tank-style pump that creates a vacuum to draw fluid up through the extraction tube without needing to be primed manually with liquid first.

What size are the extraction tubes on the 69362 pump? The black extraction tube has a 0.34 inch (11/32 inch) outer diameter and is 8 feet long, while the clean drain tube has a 0.50 inch (1/2 inch) inner diameter and is also 8 feet long.

Does this pump work with hard-to-reach drain plugs? Yes, the Trac 69362 is built specifically to provide an easier, cleaner way to drain engines with hard-to-reach drain plugs by pulling fluid out through the dipstick tube instead.

What OEM part number does the 69362 pump replace? The Trac 7-Liter Fluid/Oil Change Pump replaces the older Trac part number T10064.

Can this pump be used to extract hot oil? No. The engine should be run for about 10 minutes to warm the oil for easier pumping, but the oil should not be hot when extracted with the 69362 pump.

What comes included with the Trac 7-Liter Fluid/Oil Change Pump? The 69362 kit includes a cap, adapters, and (2) hoses along with the pump and tank, so it is ready to use on a variety of motors, watercraft, and vehicles.

Is the Trac 69362 pump safe for acids or other corrosive fluids? No, the Trac 7-Liter Fluid/Oil Change Pump is not for use with corrosive fluids such as acids; it is intended for non-corrosive fluids like oil, coolant, fuel, and transmission fluid.

How is fluid stored for tidy handling after use? The 69362 pump has a built-in clamp that holds both the black extraction tube and the clean drain tube coiled together for tidy storage between uses.

What is the difference between the 7-liter and 3-liter Trac fluid pumps? The Trac 69362 holds 7 liters (7.5 quarts) of fluid, giving it roughly double the capacity of Trac's 3-liter fluid/oil change pump, while both use the same 8-foot black and clear extraction tubes and self-priming operation.

How much does the Trac 69362 pump weigh? The Trac 7-Liter Fluid/Oil Change Pump weighs 3.43125 pounds.