Trac Trolling Motor Rigging Kit 69440 - 60 Amp 12V/24V/36V High-Current Wiring Kit, Replaces T10141

The Trac Trolling Motor Rigging Kit (69440) is a complete high-current wiring solution for connecting a trolling motor, winch, or other 12V-36V electrical device to your boat's battery. It is built around Trac's 12V/24V/36V high-current quick-connect system, which lets you plug and unplug your trolling motor or accessory without dealing with loose wire connections at the battery each time. The kit is rated to handle up to 60 amps, making it suitable for high-draw trolling motors as well as winches and other accessories.

Inside the kit you get everything needed for a full installation: two quick-connect plugs (one for the boat/battery side and one for the trolling motor or device side), a 1-1/2 inch round hole adaptor for mounting the plug through a flat panel, and a U-bracket as an alternative mounting option on a flat surface. Wiring includes 30 feet of heavy 8-gauge AWG tin-plated marine-grade positive (red) battery wire and 30 feet of matching negative (black) battery wire, plus two 14-inch 8-gauge cross-over wires for 24V and 36V systems. All heat-shrink terminations are included or pre-installed, and 28 feet of corrugated wire loom is provided to protect and route the wiring through the boat. A 60-amp manual resetting thermal circuit breaker with a visible reset lever is included for circuit protection, and 4 isolator bolts are provided to install the trolling motor or other device.

This kit replaces the older Trac part number T10141 and is designed to be installed by routing the wiring harness from the battery position to the panel or mounting location, with the circuit breaker installed on the positive wire as close to the battery as possible.

Specifications

• Brand: Trac
• Manufacturer Part Number: 69440
• UPC: 666996101413
• Voltage Compatibility: 12V, 24V, 36V
• Max Amperage: 60 Amps
• Circuit Breaker: 60 Amp Manual Resetting Thermal Circuit Breaker
• Battery Wire Length: 30 feet positive, 30 feet negative
• Battery Wire Gauge: 8 AWG
• Cross-over Wires: Two 14 inch 8-gauge wires
• Wire Loom Length: 28 feet
• Round Hole Adaptor Size: 1-1/2 inch
• Mounting Hardware: 4 isolator bolts
• Weight: 6.63125 pounds
• Product Dimensions: 7.8 x 8 x 8 inches
• Fit Type: Universal

Fitment

This kit is a universal fit for any boat that needs high-current 12V, 24V, or 36V wiring for a trolling motor, winch, or other 12V-36V device up to 60 amps.

Replaces (OEM)

• T10141

Frequently Asked Questions

What is included in the Trac Trolling Motor Rigging Kit 69440? The 69440 kit includes two quick-connect plugs, a 1-1/2 inch round hole adaptor, a U-bracket, 30 feet of 8-gauge positive battery wire, 30 feet of 8-gauge negative battery wire, two 14-inch 8-gauge cross-over wires for 24V/36V systems, a 60-amp manual resetting thermal circuit breaker, 28 feet of corrugated wire loom, and 4 isolator bolts.

How many amps does the Trac 69440 rigging kit support? Up to 60 amps, which covers 12V, 24V, and 36V trolling motors, winches, and other electrical devices wired through this kit.

Does this kit work with 12V, 24V, and 36V trolling motors? Yes, the Trac 69440 is built around a 12V/24V/36V high-current quick-connect system and includes the cross-over wires needed for 24V and 36V setups in addition to standard 12V wiring.

Does the Trac 69440 replace an older Trac part number? Yes, this kit replaces the older Trac part number T10141 with the same high-current wiring and quick-connect functionality.

What gauge wire comes with this kit? The kit uses heavy 8-gauge AWG tin-plated marine-grade wire for both the 30-foot positive and negative battery runs, as well as the 14-inch cross-over wires.

How is the circuit breaker installed in this kit? The included 60-amp manual resetting thermal circuit breaker should be installed on the battery positive wire, as close to the battery positive terminal as possible; it should never be installed on the negative wire.

Can the quick-connect plug be mounted through a flat panel? Yes, the Trac 69440 includes a 1-1/2 inch round hole adaptor for mounting the plug through a flat panel, plus a U-bracket for mounting on the side of a flat surface as an alternative.

Is this rigging kit compatible with winches or only trolling motors? The 69440 kit can be used for any 12V-36V device up to 60 amps, including trolling motors, winches, or other electrical accessories.

How long is the wire loom included with the kit? 28 feet of corrugated wire loom is included to protect and route the battery wiring through the boat.

Are heat-shrink terminations included with the wiring? Yes, all heat-shrink terminations for the Trac 69440 kit are included or pre-installed on the wiring.

What hardware is used to mount the trolling motor with this kit? 4 isolator bolts are included in the Trac 69440 kit to install the trolling motor or other device.

How much does the Trac Trolling Motor Rigging Kit weigh? The Trac 69440 rigging kit weighs 6.63125 pounds.