Turning Point Propellers Hub Kit #26 (11200600) for Suzuki DT/DF and Evinrude/Johnson Outboard Propellers

The Turning Point Propellers Hub Kit #26 (part number 11200600) is a replacement rubber hub kit used to re-fit a Turning Point stainless steel propeller onto the propeller shaft after the original hub has worn out or spun. The hub is the rubber bushing system inside a propeller that absorbs shock and allows the prop to slip slightly under sudden load, protecting the lower unit and shaft from damage on impact. Over time and use, this rubber component can wear, crack, or spin loose inside the propeller barrel, which shows up as a loss of thrust or a propeller that no longer engages the shaft properly. Hub Kit #26 replaces that worn hub so the existing propeller can be put back into service without buying a new prop.

This hub kit is sized for a 10-spline propeller shaft, with a 14-spline configuration for Evinrude/Johnson applications. It is designed to fit Suzuki DT 2-stroke 20, 25, 25C, 30, and 30C outboards ('87 and newer) and Suzuki DF 4-stroke 25hp and 30hp outboards, as well as Evinrude/Johnson 2-stroke 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), and 35hp ('76 and newer) outboards. Confirm your propeller's hub kit number matches #26 before ordering, since hub kits are sized to a specific propeller barrel and are not universal across all Turning Point propellers.

Specifications

• Brand: Turning Point Propellers
• Manufacturer Part Number: 11200600
• Hub Kit Number: 26
• Propeller Shaft Spline: 10-spline (14-spline for Evinrude/Johnson)
• UPC: 652480200182
• Weight: 1.1 pounds
• Category: Evinrude Outboard Propellers

Fitment

• Suzuki DT 2-stroke: 20hp, 25hp, 25C, 30hp, 30C ('87 and newer)
• Suzuki DF 4-stroke: 25hp, 30hp
• Evinrude/Johnson 2-stroke: 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), 35hp ('76 and newer)

Frequently Asked Questions

What is Turning Point Hub Kit #26 used for? Hub Kit #26 (part number 11200600) replaces the worn rubber hub inside a compatible Turning Point propeller so the existing propeller can be reused instead of replaced.

Which outboards is Hub Kit #26 compatible with? This hub kit fits Suzuki DT 2-stroke 20hp, 25hp, 25C, 30hp, and 30C outboards ('87 and newer), Suzuki DF 4-stroke 25hp and 30hp outboards, and Evinrude/Johnson 2-stroke 20hp, 25hp, 25hp commercial, 30hp, and 35hp outboards.

Does this hub kit work with Evinrude and Johnson engines of any year? For Evinrude/Johnson applications, Hub Kit #26 fits 25hp models from 1984 and newer, 25hp commercial models from 1993 and newer, 30hp models from 1984 and newer, and 35hp models from 1976 and newer.

What spline count does Hub Kit #26 use? Hub Kit #26 (11200600) is built for a 10-spline propeller shaft, with a 14-spline version used for Evinrude/Johnson applications.

How much does the Turning Point Hub Kit #26 weigh? The Turning Point Hub Kit #26, part number 11200600, weighs 1.1 pounds.

Will Hub Kit #26 fit any Turning Point propeller? No. Hub kits are matched to a specific propeller barrel size, so only propellers designated for hub kit #26 will accept part number 11200600.

What does a propeller hub kit actually replace? It replaces the rubber hub assembly inside the propeller barrel, which is the component that allows the propeller to slip under shock load and protect the drivetrain.

Is Hub Kit #26 a genuine Turning Point Propellers part? Yes, part number 11200600 is a genuine Turning Point Propellers hub kit, not an aftermarket equivalent.

How do I know if my propeller needs hub kit #26 versus a different hub kit? Check the hub kit number stamped on or specified for your propeller; only propellers designated for hub kit 26 will match part number 11200600.

Does the Suzuki DF 4-stroke fitment apply to all horsepower ratings? For Suzuki DF 4-stroke outboards, Hub Kit #26 (11200600) is listed for 25hp and 30hp models only.