Uflex M90X12 Mach Rotary Steering Cable for Marine Steering Systems

The Uflex M90X12 is a Mach series rotary steering cable built for marine rotary steering systems, transmitting helm input to the engine to control boat direction. As a wear item in the steering system, it is designed to be installed and maintained according to marine steering best practices to keep handling responsive and consistent at all speeds.

Proper installation matters as much as the cable itself: the steering cable must be routed avoiding excessive and/or tight bends, since sharp bends reduce steering efficiency, increase play in the system, and make handling harder for the driver. Because the cable operates in a marine environment, corrosion is a real risk to its internal components and end fittings; periodic cleaning and greasing of the cable end fittings and the engine cable support, following the engine manufacturer's specifications, helps minimize wear and corrosion over the cable's service life.

Routine inspection is recommended. If steering becomes hard or inconsistent, if cuts appear on the conduit surface, or if any other component is found damaged, the cable should be replaced immediately rather than continuing to run a compromised cable. For extended boat storage, it is recommended to remove the steering cable end fitting from its engine-side support and clean it thoroughly before storing.

Specifications

• Brand: Uflex
• Manufacturer Part Number: M90X12
• Product Name: Mach Rotary Steering Cable
• Category: Steering Cables and Kits
• Weight: 6.6 pounds
• Package Dimensions: 28 x 17 x 3 inches
• UPC: 702755044055

Frequently Asked Questions

What is the Uflex M90X12? It is a Mach series rotary steering cable from Uflex, part number M90X12, used to connect the helm to the engine in a marine rotary steering system.

How much does the M90X12 steering cable weigh? The Uflex M90X12 weighs 6.6 pounds.

What are the package dimensions of the M90X12? The Uflex M90X12 ships in packaging measuring 28 x 17 x 3 inches.

How should the M90X12 steering cable be installed? The M90X12 should be routed avoiding excessive and/or tight bends, since sharp bends reduce steering efficiency, increase system play, and make handling harder at all speeds.

Does the M90X12 need regular maintenance? Yes. Following the engine manufacturer's specifications, the cable end fittings and engine cable support on the M90X12 should be cleaned and greased periodically to minimize wear and corrosion.

How do I know if the M90X12 needs to be replaced? If steering becomes hard or inconsistent, cuts appear on the conduit surface, or any component is found damaged, the M90X12 cable should be replaced immediately.

Can marine corrosion affect the M90X12 cable? Yes, marine corrosion may cause the materials in the M90X12 steering cable to deteriorate, affecting maneuvering efficiency and, in the worst case, causing system failure.

How should the M90X12 be stored during the off season? When storing the boat for an extended period, the end fitting of the M90X12 should be removed from its engine-side support and cleaned adequately.

What category of product is the M90X12? The Uflex M90X12 is listed under Steering Cables and Kits.

What is the UPC for the Uflex M90X12? The UPC for the Uflex M90X12 Mach Rotary Steering Cable is 702755044055.