Whitecap 3230BC T-Handle Latch, Nylon Black, Non-Locking, 3 Inch Outer Diameter

The Whitecap 3230BC is a non-locking T-Handle latch built for boat hatches, doors, and access panels that need a secure, quick-release closure. The handle and cam assembly are molded from black nylon for corrosion resistance in marine environments, with a black finish that blends into most hatch and door hardware. A threaded offset cam bar comes with a set screw included, letting the cam be positioned to match the surface depth of the installation. A neoprene O-ring is fitted to help seal out moisture at the mounting point.

The latch has a 3 inch outer diameter and requires a 2-1/2 inch cut-out for installation, with a surface depth range of 1/8 inch to 3/4 inch to accommodate different panel thicknesses. The shaft is 1-3/8 inches long unless a different length is otherwise noted for a specific configuration. Mounting fasteners are included, so no separate hardware purchase is needed to install the 3230BC. Because this is a non-locking design, it is intended for interior hatches, storage compartments, and access panels where a keyed lock is not required, rather than for securing valuables or exterior security points.

Specifications

• Brand: Whitecap
• Manufacturer Part Number: 3230BC
• Product Type: T-Handle Latch
• Locking Type: Non-locking
• Material: Nylon
• Color: Black
• Finish: Black
• Handle Type: T-Handle
• Outer Diameter: 3 inches
• Cut-Out Diameter: 2-1/2 inches
• Surface Depth Range: 1/8 inch to 3/4 inch
• Shaft Length: 1-3/8 inches (unless otherwise noted)
• Cam Bar: Threaded offset cam bar with set screw included
• Seal: Neoprene O-ring
• Fasteners: Included
• Weight: 0.75 pounds

Frequently Asked Questions

Is the Whitecap 3230BC latch locking or non-locking? The Whitecap 3230BC is a non-locking T-Handle latch, meaning it operates with a simple turn-to-release action and does not include a key or lock cylinder.

What size cut-out does this latch require? The 3230BC requires a 2-1/2 inch cut-out and has a 3 inch outer diameter, so the mounting hole and surrounding trim ring should be sized accordingly.

What material is the Whitecap 3230BC made from? It is made from black nylon, chosen for its resistance to corrosion and cracking in marine conditions.

How long is the shaft on this latch? The shaft measures 1-3/8 inches long unless a different length is otherwise noted for a specific configuration of the 3230BC.

What surface thicknesses will this latch work with? The 3230BC accommodates a surface depth range of 1/8 inch to 3/4 inch, covering most hatch and access panel thicknesses found on boats.

Does the 3230BC come with mounting hardware? Yes, fasteners are included with the Whitecap 3230BC, along with a set screw for the cam bar, so no additional hardware needs to be purchased separately.

Is there a seal to help keep water out around the latch? A neoprene O-ring is fitted to the 3230BC to help seal the mounting point against moisture intrusion.

Can the cam position be adjusted? Yes, the 3230BC uses a threaded offset cam bar that can be positioned with its included set screw to match the panel's surface depth.

What color is the Whitecap 3230BC? This latch has a black nylon body with a black finish, sometimes listed as black on black.

What is this latch typically used for? The Whitecap 3230BC T-Handle latch is used on boat hatches, doors, and access panels that need a secure but non-locking quick-release closure.

How much does the 3230BC weigh? The Whitecap 3230BC weighs 0.75 pounds.

Is the 3230BC suitable for locking a compartment with valuables? No, because the 3230BC is a non-locking latch, it is best suited to interior hatches and storage compartments rather than points needing a keyed lock for security.